Technology III (FSI-6T3)

Academic year 2021/2022
Supervisor: Ing. Kamil Podaný, Ph.D.  
Supervising institute: ÚST all courses guaranted by this institute
Teaching language: Czech
Aims of the course unit:
The aim of the course is to acquaint students with the technologies of the metallurgical production and the modern technology (conventional and unconventional), which refine and supplement of the overview of the basic technologies lectured in the subject "Technology II."
This subject is included as compulsory-optional at 3rd year of the general bachelor's degree. His choice is recommended if the student intends to elect Study M-SLE, M-STG or M-STM.
Learning outcomes and competences:
The lectures and seminars will enable students to acquire knowledge of all kinds of so-called conventional and unconventional technologies, which are used in engineering plants for processing of sheets, pipes and profiles with using the sheet metal forming and solid forming carried out under cold and hot. They will get acquainted with the calculate methodology of the energo-power parameters and other important parameters of the forming processes, too.
Prerequisites:
The basic knowledge of the manufacturing technology, of the used manufacturing machines and equipments and of the knowledge of the manufacture mechanization.
Course contents:
The subject "Technology III" immediately follows the course "Technology II" and it is divided into two areas. The first part of the subject contains all necessary information of the basic technologies acquired in the course "Technology II" and it is extended to the area of the steel production, the plastic behaviour of the metals and of the other types of conventional and unconventional forming technologies which are used in the engineering production. These are namely the methods which are used for the processing of the sheet metal, tubes and profiles.
Teaching methods and criteria:
The course is taught through lectures which are focused on basic principles and theories of the individual sectors. The teaching is completed by practical laboratory exercises.
Assesment methods and criteria linked to learning outcomes:
Conditions for Graded credit it's the participation in the seminar, the written test, the accuracy of the developing computational task and activity of the students during their processing. It is classificated to the ECTS grading scale.
Controlled participation in lessons:
Attendance in lectures is recommended.
Attendance in exercises is compulsory. The attendance to the seminar is regularly checked and the participation in the lesson is recorded. The missed lesson is possible to replace with another study group in the same week. In case, that the lesson does not possible to replace, the student will elaborate the complemental task.
Type of course unit:
    Lecture  13 × 2 hrs. optionally                  
    Laboratory exercise  13 × 2 hrs. compulsory                  
Course curriculum:
    Lecture 1. Plastic behavior of metals
2. Forming limit diagrams, material models
3. Principles of the manufacturing method of the semiproduct producing in metall industry - sheet metals and profiles
4. Fundamentals pipe production and shaping - process principles, parameters, forming tools and machines
5. Flexible tools forming - process principles, parameters, forming tools and machines
6. The fine blanking technology - process principles and parameters, forming tools and machines
7. Roll bending technology - process principles, parameters, forming tools and machines
8. Deep drawing non-rotating shapes - process principles, parameters, forming tools and machines
9. Brake bending technology - process principles, parameters, forming tools and machines
10. FEM applications for analysis of forming processes
11. FEM applications for analysis of forming processes II
12. Importance of surface treatment, surface theory, degreasing
13. Pressing of metal powders
    Laboratory exercise 1. Linear approximation of deformation stresses
2. Forming limit diagrams and their meanings
3. Calculation of parameters of strain focal point during rolling
4. Calculation of wall thickness changes and control of forming force at tube bending process
5. Calculation of energo-power parameters at forming by elastomers
6. The manufacturing of fine blanking part
7. Energo-power parameters during roll bending and calculations of springback
8. The manufacturing of square container by deep drawing
9. The manufacturing of square container by deep drawing II
10. Solving of specified problem in selected FEM software
11. Solving of specified problem in selected FEM software II
12. Adaptation of surfaces, selection of consumables, renovation procedure
13. Technological parameters of metal powder pressing
Literature - fundamental:
1. SAMEK, Radko a Eva ŠMEHLÍKOVÁ. Speciální technologie tváření: Část I. 1. vyd. Brno: Akademické nakladatelství CERM, 2010. ISBN 978-80-214-4220-7.
2. SAMEK, Radko, Zdeněk LIDMILA a Eva ŠMEHLÍKOVÁ. Speciální technologie tváření: Část II. 1. vyd. Brno: Akademické nakladatelství CERM, 2011. ISBN 978-80-214-4406-5.
3. HOSFORD, William F. and Robert M. CADDEL. Metal Forming: Mechanics and Metalurgy. 3th ed. New York: Cambridge University Press, 2007. 365 s. ISBN 978-0-521-88121-0.
4. FOREJT, Milan. Teorie tváření. 2. vyd. Brno: Akademické nakladatelství CERM, 2004. 167 s. ISBN 80-214-2764-7.
5. MARCINIAK, Zdislaw, J.L. DUNCAN and S.J. HU. Mechanics of Sheet Metal Forming. 2.ed. Oxford: Butterworth-Heinemann, 2002. 211 s. ISBN 07-506-5300-00.
6. VALBERG, Henry S. Applied metal forming including FEM analysis. New York: Cambridge University Press, 2010. ISBN 978-051-1729-430.
Literature - recommended:
1. DVOŘÁK, Milan, František GAJDOŠ a Karel NOVOTNÝ. Technologie tváření: plošné a objemové tváření. 2. vyd. Brno: CERM, 2007. 169 s. ISBN 978-80-214-3425-7.
2. ŽÁK, Jan, Radko SAMEK a Bohumil BUMBÁLEK. Speciální letecké technologie I. 1. vyd. Ediční středisko VUT Brno. Brno: Rektorát Vysokého učení technického v Brně, 1990. 220 s. ISBN 80-214-0128-1.
3. SAMEK, Radko a Eva ŠMEHLÍKOVÁ. Speciální technologie tváření: Část I. 1. vyd. Brno: Akademické nakladatelství CERM, 2010. ISBN 978-80-214-4220-7.
4. SAMEK, Radko, Zdeněk LIDMILA a Eva ŠMEHLÍKOVÁ. Speciální technologie tváření: Část II. 1. vyd. Brno: Akademické nakladatelství CERM, 2011. ISBN 978-80-214-4406-5.
The study programmes with the given course:
Programme Study form Branch Spec. Final classification   Course-unit credits     Obligation     Level     Year     Semester  
B3S-P full-time study B-STI Fundamentals of Mechanical Engineering -- GCr 4 Compulsory-optional 1 3 S