Mgr. Jana Procházková, Ph.D.
E-mail:   prochazkova.j@fme.vutbr.cz  WWW:   http://jprochazkova.googlepages.com Dept.:   Institute of Mathematics Dept. of Computer Graphics and Geometry Position:   Assistant Professor Room:   A1/1926

Supervised courses:

• Data Visualisation (SVD-A)
• Data Visualisation (SVD)
• Reconstruction and Analysis of 3D Scenes (SR0)
• Reconstruction and Analysis of 3D Scenes (SR0-A)
• Reconstruction and Analysis of 3D Scenes (QRA)

Publications:

• ZEJDA, M.; PROCHÁZKOVÁ, J.; PROCHÁZKA, D.; DAŘENA, F.:
  Object recognition based on point clouds obtained by laser scanners on mobile devices,
  PEFnet 2021, pp.147-148, ISBN 978-80-7509-811-5, (2021), Mendel University Press
  abstract
• PROCHÁZKOVÁ, J.; PROCHÁZKA, D.; LANDA, J.:
  Sharp Feature Detection as a Useful Tool in Smart Manufacturing, MDPI
  journal article in Web of Science
• PROCHÁZKA, D.; PROCHÁZKOVÁ, J.; LANDA, J.:
  Automatic lane marking extraction from point cloud into polygon map layer, Tayor and Francis
  journal article in Web of Science
• PROCHÁZKOVÁ, J.; NOVÁK, J.:
  The solution of free-form deformation problem using pseudoinverse, Academic Publication, Ltd.
  journal article in Scopus
• ŠTARHA, P.; PROCHÁZKOVÁ, J.; MARTIŠEK, D.:
  The reconstruction of the object surface using confocal microscope with hyperchromatic lens, Brno University of Technology, Faculty of Mechanical Engineering, Institute of Automation and Computer Science
  journal article in Scopus
• MARTIŠEK, D.; PROCHÁZKOVÁ, J.:
  The Analysis of Rock Surface Asperities, BUT Czech Rep.
  journal article in Scopus
• PROCHÁZKOVÁ, J.; MARTIŠEK, D.:
  Notes on iterative closest algorithm,
  17th Conference on Applied Mathematics Aplimat 2018 Proceedings, pp.876-884, ISBN 978-80-227-4765-3, (2018), Institute of Mathematics and Physics, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava
  conference paper
  akce: Aplimat 2018, Bratislava, 06.02.2018-08.02.2018
• MARTIŠEK, D.; PROCHÁZKOVÁ, J.:
  The Enhancement of 3D Scans Depth Resolution Obtained by Confocal Scanning of Porous Materials, De Gruyter Open
  journal article in Web of Science
• PROCHÁZKA, D.; LANDA, J.; PROCHÁZKOVÁ, J.:
  Automatic Lane Marking Extraction From Point Cloud Into Polygon Map Layer,
  37th EARSeL Symposium - Smart Future with Remote Sensing, pp.52-52, ISBN 978-80-01-06192-3, (2017), Ceské vyskové učení technické v Praze
  abstract
• PROCHÁZKOVÁ, J.; KRATOCHVÍL, J.:
  Direct Point Cloud Visualisation Using T-spline with Feature Detection,
  Mendel Journal series, pp.240-251, ISBN 1803-3814, (2017), Springer International Publishing AG 2017
  journal article in Scopus
  akce: Mendel 2016, Brno, 08.06.2016-10.06.2016
• PROCHÁZKOVÁ, J.:
  Free form deformation methods - the theory and practice,
  Aplimat 2017 - Proceedings of 16th Conference of Applied Mathematics, pp.1276-1283, ISBN 9781510836983, (2017), Slovak University of Technology Bratislava
  conference paper
  akce: Aplimat 2017, Bratislava, 31.01.2017-02.02.2017
• MARTIŠEK, D.; PROCHÁZKOVÁ, J.; FICKER, T.:
  High-quality three-dimensional reconstruction and noise reduction of multifocal images from oversized samples
  journal article in Scopus
• PROCHÁZKA, D.; LANDA, J.; PROCHÁZKOVÁ, J.; KLIMÁNEK, M.:
  Geospatial Infrastructure for European Union Sustainable Development,
  Competitivness, Social Inclusion and Sustainability in a Diverse European Union, pp.179-189, ISBN 978-3-319-17298-9, (2015), Springer
  book chapter
• MARTIŠEK, D.; PROCHÁZKOVÁ, J.:
  Relation between algebraic and geometric view on NURBS tensor surfaces,
  APPLICATIONS OF MATHEMATICS, Vol.2010, (2010), No.5, pp.419-430, ISSN 0862-7940
  journal article - other
• PROCHÁZKA, D.; PROCHÁZKOVÁ, J.:
  Direct extending of NURBS surfaces,
  Journal of Mathematics, Statistics and Allied Fields, Vol.2, (2008), No.1, pp.1-8, ISSN 1556-6757
  journal article - other
• SEDLÁK, J.; PROCHÁZKOVÁ, J.:
  Direct B-Spline Interpolation of CNC Tool Trace From Cloadpoints,
  Manufacturing TECHNOLOGY, Vol.7, (2007), No.1, pp.66-71, ISSN 1213-2489, UJEP
  journal article - other
• MARTIŠEK, D.; MARTIŠEK, K.; PROCHÁZKOVÁ, J.:
  New methods for space reconstruction of inside cell structures,
  Journal of Applied Biomedecine, Vol.2007, (2007), No.5, pp.151-155, ISSN 1214-0287
  journal article - other
• SEDLÁK, J.; PROCHÁZKOVÁ, J.:
  Direct B-Spline Interpolation of CNC Tool Trace From Cloadpoints,
  Strojírenská technologie, Vol.12, (2007), No.2, pp.24-28, ISSN 1211-4162, UJEP
  journal article - other

List of publications at Portal BUT

Abstracts of most important papers:

• MARTIŠEK, D.; PROCHÁZKOVÁ, J.:
  Relation between algebraic and geometric view on NURBS tensor surfaces,
  APPLICATIONS OF MATHEMATICS, Vol.2010, (2010), No.5, pp.419-430, ISSN 0862-7940
  journal article - other
  Paper explains the relationship between the classic algebraic point of view and the practical geometrical application on NURBS.
• PROCHÁZKA, D.; PROCHÁZKOVÁ, J.:
  Direct extending of NURBS surfaces,
  Journal of Mathematics, Statistics and Allied Fields, Vol.2, (2008), No.1, pp.1-8, ISSN 1556-6757
  journal article - other
  The article shows the method for direct connection of NURBS surfaces during its constructiion.
• SEDLÁK, J.; PROCHÁZKOVÁ, J.:
  Direct B-Spline Interpolation of CNC Tool Trace From Cloadpoints,
  Manufacturing TECHNOLOGY, Vol.7, (2007), No.1, pp.66-71, ISSN 1213-2489, UJEP
  journal article - other
  Reverse Engineering (RE) is the technology which enables rapid data acquisition for systems CAD, CAM, CAE and by this way considerably to reduce the time of development of component construction and production. This technology drop not to be dominant in development of new products in automotive and aircraft industry and starts to be used in consumer industry and in public health.
• MARTIŠEK, D.; MARTIŠEK, K.; PROCHÁZKOVÁ, J.:
  New methods for space reconstruction of inside cell structures,
  Journal of Applied Biomedecine, Vol.2007, (2007), No.5, pp.151-155, ISSN 1214-0287
  journal article - other
  Paper discusses new methods for 3D processing of confocal microscope outputs - single optical cuts through an explored object.
• SEDLÁK, J.; PROCHÁZKOVÁ, J.:
  Direct B-Spline Interpolation of CNC Tool Trace From Cloadpoints,
  Strojírenská technologie, Vol.12, (2007), No.2, pp.24-28, ISSN 1211-4162, UJEP
  journal article - other
  Reverse Engineering (RE) is the technology which enables rapid data acquisition for systems CAD, CAM, CAE and by this way considerably to reduce the time of development of component construction and production. This technology drop not to be dominant in development of new products in automotive and aircraft industry and starts to be used in consumer industry and in public health.