Curriculum

Academic year 2024/2025

Branch: CZS	Grade: 1
full-time study	Year: 1

Course			Credits	Scope	Assesment	Superv. Inst.	Supervisor
winter semester
Elective
BMK	Fundamentals of Quality Management and Environment	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
CKP	Machine Design and Machine Elements	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚK	prof. Ing. Martin Hartl, Ph.D.
CLA	English in Aviation I	en	3	P: 13 × 1 Cj: 13 × 1	Cr	ÚJ	Mgr. Petr Klouda
CLD	Aviation Law and Regulations I	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	LÚ	Ing. Jiří Chlebek, Ph.D.
CLO	Human Factor and Limitations	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	LÚ	MUDr. Jana Hlaváčová
CME	Metallurgy	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
CPB	Industrial Safety	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚVSSR	Ing. Luboš Kotek, Ph.D.
CS1	Statistics and Probability	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	Ing. Mgr. Eva Mrázková, Ph.D.
DKS	Aircraft Structure and Systems II	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
DLF	Communication and Aerial Phraseology	cs	3	P: 13 × 2 C1: 13 × 1	GCr	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
DLG	General Navigation	cs	6	P: 13 × 4 C1: 13 × 2	Cr,Ex	LÚ	Ing. Róbert Šošovička, Ph.D.
DLL	Aeronautical On-Board Instruments	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
DPM	Industrial Metrology	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
DPP	Computer Aided Technology	cs	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚST	Ing. Jan Řiháček, Ph.D.
DR2	Year Project I - Metal Forming, Welding	cs	3	L: 13 × 2	GCr	ÚST	Ing. Miroslav Jopek, Ph.D.
DR3	Year Project II - Machining	cs	3	L: 13 × 2	GCr	ÚST	prof. Ing. Miroslav Píška, CSc.
DTZ	Technique and Technology of Heat Treatment	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Miloslav Kouřil, CSc.
EAC	Application of CAD/CAM in Machining Technology I	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚST	Ing. Martin Slaný, Ph.D.
EDO	Transport and Handling Equipment	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
ELI	Operation Procedures	cs	3	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	JUDr. Jaromír Hammer
ELV	Aircraft Propulsion Units	cs	6	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	Ing. Mgr. Pavel Imriš, Ph.D.
EPS	Operation, Maintenance and Reliability of Machines	cs	4	P: 13 × 2 C1: 9 × 2 CPP: 4 × 2	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
ERN	Radio Navigation II	cs	6	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
ERS	Control of Machines and Drives	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Tomáš Marada, Ph.D.
ESL	Advanced Foundry Technology	cs	4	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Milan Horáček, CSc.
ESV	Special Technology of Production	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Josef Sedlák, Ph.D.
ETM	Technological Projects and Materials Handling	cs	5	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚST	Ing. Marek Štroner, Ph.D.
ETV	Technology of Welding	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	Ing. Marian Sigmund, Ph.D., IWE
FHM	Hydraulic and Mechnaical Gears	cs	4	P: 13 × 3 L: 6 × 1 C1: 7 × 1	Cr,Ex	ÚADI	doc. Ing. Miroslav Škopán, CSc.
FLV	Flight Performance	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Róbert Šošovička, Ph.D.
FSI	Simulation of Dynamic Systems	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Zdeněk Hadaš, Ph.D.
GA0	Analysis of Machine-part Failures	cs	3	P: 13 × 2	Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
GCK	Czech Culture, Language and Industry	cs	6	C1: 13 × 4	GCr	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
GDV	Dynamics of Machine Tools	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚMTMB	Ing. Pavel Švancara, Ph.D.
GEN1	General English I	en	0	Cj: 13 × 2 CPP: 13 × 1	Cr	ÚJ	Mgr. Dita Gálová, Ph.D.
GE2	Electrical Engineering of Production Machines II	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Rostislav Huzlík, Ph.D.
GHP	Hydraulic and Pneumatic Mechanisms	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GMD	Module Project (B-VSY)	cs	9	C1: 13 × 4	GCr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GMK	Modern Methods of Constructional and Strength Calculations	cs	4	CPP: 13 × 4	GCr	ÚVSSR	prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng.
GMP	Module Project I	cs	5	C1: 13 × 4	Cr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GMR	Risk Management of Machinery and Electrical Equipment	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
GM0	Design Methodology	cs	3	P: 13 × 2	Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
GNS	German in Engineering	de	6	Cj: 13 × 2	Cr,Ex	ÚJ	Mgr. Dita Gálová, Ph.D.
GOK	Calculations and Simulation in Design of Machine Tools	cs	6	P: 13 × 2 CPP: 13 × 4	Cr,Ex	ÚVSSR	doc. Ing., Dipl.-Ing Michal Holub, Ph.D.
GPI	Computer Aided Production (CAD/CAM)	cs	4	CPP: 13 × 4	GCr	ÚVSSR	Ing. Jiří Tůma, Ph.D.
GPN	Project Management	cs	4	P: 13 × 2 CPP: 13 × 1	GCr	ÚVSSR	doc. Dr. Ing. Daniel Prostredník, CSc.
GPZ	Industrial Robots and Manipulators I	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GRI	Quality Management	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
GSE	Sensors and Data Acquisition	cs	7	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚVSSR	Ing. Pavel Houška, Ph.D.
GTA	Theory and Design of Manufacturing Systems	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng.
GV0-A	Manufacturing Machines Technology	en	4	P: 13 × 2 C1: 13 × 1	GCr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
G1S	Construction of Production Machines I	cs	6	P: 13 × 4	Ex	ÚVSSR	prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng.
G2S	Construction of Production Machines III	cs	4	P: 13 × 4	GCr	ÚVSSR	prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng.
HAP	Application of Polymers in the Automotive Industry	cs	4	P: 13 × 2 C1: 13 × 2	GCr	ÚST	Ing. Jitka Stolínová, Ph.D.
HC1	Application of CAD/CAM in Technology	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚST	Ing. Jan Zouhar, Ph.D.
HE1	Experimental Methods	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Miroslav Jopek, Ph.D.
HH2	Technology of Forming	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Michaela Císařová, Ph.D.
HLT	Lighting Technology	cs	6	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Petr Baxant, Ph.D.
HNA	Processes, Jigs and Tools in Forming Technology	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Radim Kocich, Ph.D.
HNC-A	Technology of CNC Machining	en	8	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	prof. Ing. Miroslav Píška, CSc.
HNE	Unconventional Technology	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚST	Ing. Eva Peterková, Ph.D.
HOE	Optics and Electronics in the Automotive Industry	cs	2	P: 13 × 2 C1: 13 × 2	GCr	ÚST	Ing. Josef Vochyán, Ph.D.
HO1	Special Technology of Machining	cs	6	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	doc. Ing. Josef Sedlák, Ph.D.
HPC	Theory of Metallurgical Processes	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
HPT	Computer Aided Technology	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚST	Ing. Jan Řiháček, Ph.D.
HP1	Company Management	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚST	doc. Ing. Petr Pirožek, Ph.D.
HST	Special Technology of Forming Metals	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Eva Peterková, Ph.D.
HSV	Special Welding Technology	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Kamil Podaný, Ph.D.
HS2	Welding Theory and Technology	cs	5	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	Ing. Marian Sigmund, Ph.D., IWE
HTV	Technological Preparation of Production	cs	6	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	doc. Ing. Josef Sedlák, Ph.D.
HTZ	Plastics Processing Technology	cs	8	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	Ing. Kamil Podaný, Ph.D.
H2U	Accounting	cs	7	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚST	prof. Ing. Tomáš Meluzín, Ph.D.
IEM	Experimental Methods	cs	4	P: 13 × 2 L: 13 × 2	GCr	EÚ	doc. Ing. František Lízal, Ph.D.
IEP	Experimental Methods and Instruments	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	EÚ	Ing. Ladislav Šnajdárek, Ph.D.
IES	Energy Simulations	cs	3	CPP: 13 × 3	GCr	EÚ	doc. Ing. Pavel Charvát, Ph.D.
IHV	Noise and Vibrations	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	prof. Ing. Jan Jedelský, Ph.D.
IKT	Boilers and Heat Exchangers	cs	5	P: 13 × 3 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
IKV	Compact Heat Exchangers	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	EÚ	Ing. Jiří Hejčík, Ph.D.
IMP	Computational Support in Energy	cs	3	CPP: 13 × 3	GCr	EÚ	Ing. Martin Lisý, Ph.D.
IMT	Advanced Thermofluid Simulations	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	EÚ	doc. Ing. Jaroslav Katolický, Ph.D.
ITP	Environmental Engineering	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Pavel Charvát, Ph.D.
IVK	Ventilation and Air Conditioning I	cs	9	P: 13 × 5 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Bc. Jan Fišer, Ph.D.
IVT	Heating	cs	8	P: 13 × 3 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Jaroslav Katolický, Ph.D.
IZR	Fundamentals of Indoor Environmental Engineering	cs	3	P: 13 × 2 C1: 13 × 1	GCr	EÚ	doc. Ing. Pavel Charvát, Ph.D.
KAM	Application of FEM	cs	3	CPP: 13 × 3	Cr	ÚPI	doc. Ing. Vítězslav Máša, Ph.D.
KBP	Balancing of Process and Energy Systems	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Martin Pavlas, Ph.D.
KDP	Mass Transfer Processes	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Jaroslav Jícha, CSc.
KEL	Process and Power Engineering and Legislation	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚPI	doc. Ing. Martin Pavlas, Ph.D.
KEM	Experimental Methods	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Vítězslav Máša, Ph.D.
KHL	Hydraulic Processes	cs	8	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Vítězslav Máša, Ph.D.
KKP	Construction of Process Equipment I	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Jaroslav Jícha, CSc.
KNP	Design of Process and Power Systems	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Zdeněk Jegla, Ph.D.
KPJ	Design and Control of Processes	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Vítězslav Máša, Ph.D.
KRR	Year-class Project	cs	3	CPP: 13 × 6	GCr	ÚPI	prof. Ing. Petr Stehlík, CSc., dr. h. c.
KS1	Thermodynamic Engineering	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	doc. Ing. Vítězslav Máša, Ph.D.
KTP-A	Heat Transfer Processes	en	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚPI	prof. Ing. Petr Stehlík, CSc., dr. h. c.
KT0	CAD Projection of Heat Transfer Equipment for Processes and Power Systems	cs	3	CPP: 13 × 3	Cr	ÚPI	doc. Ing. Zdeněk Jegla, Ph.D.
K20	Practical Applications of CFD	cs	3	CPP: 13 × 3	Cr	ÚPI	doc. Ing. Vojtěch Turek, Ph.D.
LFI	Fluid Engineering	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Simona Fialová, Ph.D.
LK	Boilers	cs	6	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Zdeněk Skála, CSc.
LLS	Turbomachinery	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Jan Fiedler, Dr.
LPA	Steam Turbines	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Jan Fiedler, Dr.
LPR	Designing of Power Centrals	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	EÚ	Ing. Petr Kracík, Ph.D.
LPS	Combustion and Fuels	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
LVT	Heat Exchangers	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
LZO	Year Project ENI	cs	4	CPP: 13 × 5	Cr	EÚ	Ing. Martin Lisý, Ph.D.
LZP	Energy Sources and Transformation	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
LZ2	Thermal Machines	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	Ing. Petr Kracík, Ph.D.
MCS	Design of Pump Stations and Hydropower Plants	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	doc. Ing. Miloslav Haluza, CSc.
MIM	Fluid Power	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	EÚ	prof. Ing. František Pochylý, CSc.
MIT	Experiments in Fluid Systems	cs	4	P: 13 × 1 L: 13 × 3	GCr	EÚ	doc. Ing. Vladimír Habán, Ph.D.
MRR	Year Project FLI	cs	2	CPP: 13 × 3	GCr	EÚ	doc. Ing. Pavel Rudolf, Ph.D.
MS1	Fluid Machinery I	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	EÚ	doc. Ing. Miloslav Haluza, CSc.
MUV	Design and Operation of Water and Wastewater Treatment Plants	cs	3	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	doc. Ing. Jaroslav Štigler, Ph.D.
NSM	Machines for Production of Building Materials	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
N7	German for Specific Purposes I	de	4	Cj: 13 × 2	Cr,Ex	ÚJ	Mgr. et Mgr. Monika Ryšavá
OAE	Aeroelasticity	cs	4	P: 13 × 2 L: 1 × 1 C1: 12 × 1	Cr,Ex	LÚ	Ing. Jan Navrátil, Ph.D.
OA1-A	Aerodynamics I	en	6	P: 13 × 4 L: 2 × 1 C1: 11 × 1	Cr,Ex	LÚ	Ing. Robert Popela, Ph.D.
OBP	Commercial Transport	cs	4	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	Ing. Miroslav Šplíchal, Ph.D.
OEM	Air Traffic Economics and Management	cs	3	P: 13 × 2 C1: 13 × 1	GCr	LÚ	doc. Ing. Ladislav Janíček, Ph.D., MBA, LL.M.
OEM-A	Air Traffic Economics and Management	en	3	P: 13 × 2 C1: 13 × 1	GCr	LÚ	doc. Ing. Ladislav Janíček, Ph.D., MBA, LL.M.
OKL	Aircraft Composite Structures	cs	4	P: 13 × 2 L: 1 × 1 C1: 12 × 1	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OK2	Aircraft Design	cs	3	P: 13 × 2 C1: 13 × 1	GCr	LÚ	doc. Ing. Ivo Jebáček, Ph.D.
OK3	Space Structures Design	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Robert Popela, Ph.D.
OLE	Aircraft Propulsion	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Miroslav Šplíchal, Ph.D.
OLI	Aeronautical Regulations and Aviation Personnel Licencing	cs	2	P: 13 × 2	GCr	LÚ	JUDr. Jaromír Hammer
OLN	Air Navigation Devices	cs	7	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	Ing. Miroslav Šplíchal, Ph.D.
OLR	Aircraft Materials and Technology	cs	6	P: 13 × 3 L: 2 × 1 C1: 11 × 1	Cr,Ex	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
OLZ	Airport I	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Radomír Janík
OL0	English in Aviation	en	2	Cj: 13 × 2	Cr	ÚJ	Mgr. Petr Klouda
OML	Flight Mechanics II	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	LÚ	Ing. Pavel Zikmund, Ph.D.
OPO	Aircraft Maintenance	cs	4	P: 13 × 3 L: 2 × 1 C1: 11 × 1	GCr	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
OPP	Computer Aided Design and Manufacturing	cs	4	P: 13 × 1 CPP: 13 × 3	GCr	LÚ	Ing. Jan Šplíchal, Ph.D.
OP2	Operation and Economy of Air Devices II	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Jiří Chlebek, Ph.D.
ORZ	Continuing Airworthiness Management for Aircrafts	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Miroslav Šplíchal, Ph.D.
OSD	Reliability and Maintainability of Aircraft	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
OSZ	Aircraft Structure	cs	6	P: 13 × 5 L: 1 × 2 C1: 12 × 2	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OZK-A	Aircraft Testing	en	4	P: 13 × 2 L: 8 × 1 C1: 5 × 1	Cr,Ex	LÚ	doc. Ing. Ivo Jebáček, Ph.D.
OZ0	Space Flight Mechanics	cs	3	P: 13 × 2 C1: 13 × 1	GCr	LÚ	Ing. Pavel Zikmund, Ph.D.
OZ1	Principles of Flight I	cs	4	P: 13 × 2 C1: 13 × 1	GCr	LÚ	Ing. Pavel Zikmund, Ph.D.
PFM	Moulding Materials and Ecology	cs	7	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Milan Horáček, CSc.
PKO	Castings Quality Control	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
PLI	Processing of Special Castings	cs	4	P: 13 × 2 L: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
PLL	Metallurgy of Cast Iron	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
POL	Machining of cast materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Karel Osička, Ph.D.
PSL	Foundry Technology II	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Milan Horáček, CSc.
PTE	Foundry Technology I	cs	7	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Milan Horáček, CSc.
PZS	Machinery of Foundry Plants	cs	7	P: 13 × 4 CPP: 13 × 1	Cr,Ex	ÚST	doc. Ing. Libor Čamek, Ph.D.
QAM	Applied Mechanics of Building and Transport Machines	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚADI	Ing. Lukáš Zeizinger, Ph.D.
QA0	Concept Development of a Car	cs	3	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚADI	Ing. Jan Vančura, Ph.D.
QBB	Batteries for electromobility and infrastructure	cs	6	P: 13 × 2 L: 6 × 2 C1: 7 × 2	Cr,Ex	FEKT	doc. Ing. Tomáš Kazda, Ph.D.
QDY	Dynamics of Vehicles	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Petr Porteš, Ph.D.
QE1	Systems, Control and Mechatronics of Vehicles	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Pavel Kučera, Ph.D.
QHV	Vehicle Driving Mechanisms	cs	6	P: 13 × 2 CPP: 13 × 2	GCr	ÚADI	Ing. Lubomír Drápal, Ph.D.
QLD	Project, Design and Logistics of Transport and Handling Equipment	cs	3	P: 13 × 3 C1: 13 × 1	Cr,Ex	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
QLV	Logistics and Plant Transport	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Miroslav Škopán, CSc.
QMH	Mechanic and Hydraulic Gears	cs	6	P: 13 × 3 L: 4 × 2 C1: 9 × 2	Cr,Ex	ÚADI	doc. Ing. Miroslav Škopán, CSc.
QMK	Computer Aided Design of Mechanical Structures	cs	6	CPP: 13 × 6	Cr,Ex	ÚADI	Ing. Přemysl Pokorný, Ph.D.
QMO	Multiphysical Simmulation in Automotive Industry	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	prof. Ing. Pavel Novotný, Ph.D.
QN1	Supporting Structures of Machines I	cs	3	P: 13 × 2 CPP: 13 × 1	Cr	ÚADI	Ing. Přemysl Pokorný, Ph.D.
QPA	Simmulation in Automotive Industry	cs	6	P: 13 × 2 CPP: 13 × 3	Cr,Ex	ÚADI	prof. Ing. Pavel Novotný, Ph.D.
QRA	Reconstruction and Analysis of 3D Scenes	cs	6	P: 13 × 2 CPP: 13 × 2	GCr	ÚM	Mgr. Jana Procházková, Ph.D.
QRU	Gearing Devices of Vehicles	cs	6	P: 13 × 2 L: 4 × 2 C1: 9 × 2	Cr,Ex	ÚADI	Ing. Aleš Prokop, Ph.D.
QSV	Technology and Machines in Building Industry	cs	3	P: 13 × 2	GCr	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
QTS	Theory of Energy Transformation, Power Units	cs	6	P: 13 × 3 L: 10 × 2 CPP: 3 × 2	Cr,Ex	ÚADI	prof. Ing. Josef Štětina, Ph.D.
QTT	Vehicle testing	cs	6	L: 9 × 5 CPP: 4 × 5	GCr	ÚADI	Ing. Jan Vančura, Ph.D.
QVO	Vehicle Engines	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚADI	Ing. David Svída, Ph.D.
RAE-A	Energy Harvesting and Smart Materials	en	5	P: 13 × 1 L: 13 × 2	GCr	ÚMTMB	doc. Ing. Zdeněk Hadaš, Ph.D.
RBA	Biomechanics I - Introduction	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚMTMB	Ing. Petr Marcián, Ph.D.
RBK	Biomechanics IV - Bioacoustics	cs	3	P: 13 × 1 CPP: 13 × 1	Cr,Ex	ÚMTMB	Ing. Pavel Švancara, Ph.D.
RBM	Biomechanics III - Cardiovascular	cs	6	P: 13 × 2 CPP: 13 × 1	GCr	ÚMTMB	prof. Ing. Jiří Burša, Ph.D.
RDM	Dynamics of Electric Machines	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	UVEE	doc. Ing. Radoslav Cipín, Ph.D.
RDO	Modeling and Simulation I	cs	6	P: 13 × 2 L: 13 × 1 CPP: 13 × 1	Cr,Ex	ÚMTMB	doc. Ing. Robert Grepl, Ph.D.
REM	Experimental Mechanics	cs	6	P: 13 × 2 L: 13 × 3	Cr,Ex	ÚMTMB	Ing. Petr Krejčí, Ph.D.
RES	Electrical Servodrives	cs	7	P: 13 × 2 C1: 13 × 1	Cr,Ex	UVEE	doc. Ing. Pavel Vorel, Ph.D.
RFO-A	Photonics	en	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚFI	prof. RNDr. Jiří Petráček, Dr.
RIR	Intelligent Control Systems	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚVSSR	Ing. Jiří Kovář, Ph.D.
RIV	FEM in Engineering Computations I	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	prof. Ing. Jindřich Petruška, CSc.
RKB-A	Constitutive Equations for BIO	en	6	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚMTMB	prof. Ing. Jiří Burša, Ph.D.
RKD	Modeling and Simulations II	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚMTMB	doc. Ing. Robert Grepl, Ph.D.
RKI-A	Constitutive Equations for IME	en	6	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚMTMB	prof. Ing. Jiří Burša, Ph.D.
RMA	Mathematics - Selected Topics	cs	5	P: 13 × 2 C1: 13 × 2	GCr	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
RMB	Mathematics - Fundamentals	cs	5	P: 13 × 2 C1: 13 × 2	GCr	ÚM	Mgr. Jana Hoderová, Ph.D.
RMK	Limit States of Metallic Structures	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	Ing. Petr Vosynek, Ph.D.
RMO	Mechanics of Composite Materials	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	Ing. Zdeněk Majer, Ph.D.
RNI	Industrial Electronics	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	UVEE	doc. Ing. Pavel Vorel, Ph.D.
RPA	Programmable Logic Controllers	cs	3	P: 13 × 1 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Jan Vetiška, Ph.D.
RRL	Control Electronics	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	UVEE	doc. Ing. Pavel Vorel, Ph.D.
RRS	Dynamics IV - Rotor Systems	cs	3	P: 13 × 1 CPP: 13 × 1	GCr	ÚMTMB	Ing. Petr Lošák, Ph.D.
RSD	Real-time Systems and LabVIEW	cs	7	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMTMB	Ing. Petr Krejčí, Ph.D.
RSZ	Introduction to Signal Processing	cs	5	P: 13 × 1 CPP: 13 × 2	GCr	ÚMTMB	doc. Ing. Jiří Krejsa, Ph.D.
RTK	Thin-walled Structures	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚMTMB	prof. Ing. Jindřich Petruška, CSc.
RVP	Science Project	cs	5	PX: 1 × 120	GCr	ÚMTMB	prof. Ing. Jindřich Petruška, CSc.
RVP-A	Science Project	en	5	PX: 1 × 120	GCr	ÚMTMB	prof. Ing. Jindřich Petruška, CSc.
R2D	Dynamics II - Linear Vibration	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	Ing. Lubomír Houfek, Ph.D.
R5D	Dynamics V - Selected Chapters	cs	4	P: 13 × 1 CPP: 13 × 1	GCr	ÚMTMB	Ing. Petr Lošák, Ph.D.
SA1	Mathematical Analysis I	cs	8	P: 13 × 4 C1: 11 × 4 CPP: 2 × 4	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
SA3	Mathematical Analysis III	cs	7	P: 13 × 3 C1: 11 × 3 CPP: 2 × 3	Cr,Ex	ÚM	prof. RNDr. Jan Čermák, CSc.
SDM	Methods of Discrete Mathematics	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SFA-A	Fourier Analysis	en	4	P: 13 × 2 C1: 13 × 1	GCr	ÚM	prof. Aleksandre Lomtatidze, DrSc.
SFI-A	Financial Mathematics	en	4	P: 13 × 2 CPP: 13 × 1	GCr	ÚM	RNDr. Pavel Popela, Ph.D.
SFM	Fuzzy Sets and Applications	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. RNDr. Libor Žák, Ph.D.
SGA-A	Graphs and Algorithms	en	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SHE-A	Heuristics in Logistics Problems	en	4	P: 13 × 1 C1: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Jan Roupec, Ph.D.
SIS	Principles of Intelligent Systems	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚM	Ing. Pavla Sehnalová, Ph.D.
SKG	Constructive Geometry and Computer Graphics	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Ing. Pavel Štarha, Ph.D.
SLA	Linear Algebra I	cs	6	P: 13 × 3 C1: 11 × 2 CPP: 2 × 2	Cr,Ex	ÚM	doc. Mgr. Petr Vašík, Ph.D.
SLN-A	Linear and Non-linear Optimization in Logistics	en	3	P: 13 × 2 C1: 13 × 1	GCr	ÚM	RNDr. Pavel Popela, Ph.D.
SLO-A	Seminars in Logistics	en	25	P: 13 × 12 C1: 13 × 10	Ex	HiMolde	Prof. Arild Hoff
SMM	Mathematical Methods in Fluid Dynamics	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
SMM-A	Mathematical Methods in Fluid Dynamics	en	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
SMO-A	Applied Mathematics for Logistics	en	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Petr Vašík, Ph.D.
SN1	Numerical Methods I	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Ing. Petr Tomášek, Ph.D.
SN3	Numerical Methods III	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	doc. Ing. Petr Tomášek, Ph.D.
SOM-A	Optimization Models	en	3	CPP: 13 × 2	Cr	ÚM	RNDr. Pavel Popela, Ph.D.
SO2	Optimization II	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	RNDr. Pavel Popela, Ph.D.
SO2-A	Optimization II	en	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	RNDr. Pavel Popela, Ph.D.
SPD	Partial Differential Equations	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Zdeněk Opluštil, Ph.D.
SPP-A	Proposal Presentation	en	5	C1: 13 × 2	Cr	HiMolde	Prof. Arild Hoff
SP2	Probability and Statistics II	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Zuzana Hübnerová, Ph.D.
SP3	Probability and Statistics III	cs	4	P: 13 × 2 CPP: 13 × 1	GCr	ÚM	doc. Mgr. Zuzana Hübnerová, Ph.D.
SRM	Ordinary Differential Equations in Mechanics	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚM	doc. Ing. Jiří Šremr, Ph.D.
SSJ	Reliability and Quality	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	Ing. Pavel Hrabec, Ph.D.
SU2	Functional Analysis II	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	prof. Aleksandre Lomtatidze, DrSc.
SU2-A	Functional Analysis II	en	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	prof. Aleksandre Lomtatidze, DrSc.
SZP	Basics of Programming	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚM	doc. Ing. Pavel Štarha, Ph.D.
S1D-A	Probability, Statistics and Data Analysis: Introductive Course	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. RNDr. Libor Žák, Ph.D.
S1M	Calculus of Variations	cs	4	P: 13 × 2 C1: 13 × 1	GCr	ÚM	doc. RNDr. Miroslav Kureš, Ph.D.
S2D-A	Probability, Statistics and Data Analysis: Advanced Course	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Zuzana Hübnerová, Ph.D.
TAO	Wave Optics	cs	7	P: 13 × 2 L: 7 × 2 C1: 6 × 2	Cr,Ex	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
TA1	Mathematical Analysis I F	cs	7	P: 13 × 4 C1: 11 × 4 CPP: 2 × 4	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
TBF	Biophotonics	cs	2	P: 13 × 1 L: 13 × 1	Cr	ÚFI	Ing. Daniel Zicha, CSc.
TBI	Molecular Biology	cs	3	P: 13 × 3 L: 3 × 1 C1: 10 × 1	Cr,Ex	ÚFI	doc. RNDr. Miroslav Fojta, CSc.
TCO	Particle Optics and Electron Microscopy	cs	5	P: 13 × 2 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚFI	prof. RNDr. Bohumila Lencová, CSc.
TEF	Electrical Engineering and Electronics in Physical Experiment	cs	4	P: 13 × 1 L: 13 × 2	GCr	ÚFI	Ing. Zdeněk Nováček, Ph.D.
TEN1	Technical English I	en	0	Cj: 13 × 2	Cr	ÚJ	Mgr. Jaroslav Trávníček
TFV	Physical Properties of Materials	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Tomáš Šikola, CSc.
TF1	General Physics I (Mechanics and Molecular Physics)	cs	7	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	doc. Ing. Radek Kalousek, Ph.D.
TF3	General Physics III (Vibrations, Waves and Optics)	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	doc. Mgr. Vlastimil Křápek, Ph.D.
TIO	Engineering Optics	cs	7	P: 13 × 2 L: 6 × 2 C1: 7 × 2	Cr,Ex	ÚFI	doc. Ing. Pavel Pořízka, Ph.D.
TKK	Introduction to Design of Scientific Instruments	cs	6	P: 13 × 2 C1: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚFI	Ing. Zbyněk Dostál, Ph.D.
TK1	Design of Instruments and Optomechanics I	cs	8	P: 13 × 3 CPP: 13 × 4	Cr,Ex	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
TLA	Fundamentals of Linear Algebra	cs	2	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	doc. Mgr. Jaroslav Hrdina, Ph.D.
TMK	Optical Microscopy and Spectroscopy	cs	5	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚFI	Ing. Daniel Zicha, CSc.
TMM	Theoretical Mechanics and Continuum Mechanics	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	doc. Ing. Radek Kalousek, Ph.D.
TNF-A	Nanophotonics and Plasmonics	en	4	P: 13 × 2 C1: 10 × 2 CPP: 3 × 2	Cr,Ex	ÚFI	prof. RNDr. Tomáš Šikola, CSc.
TNI	Nanoelectronics	cs	4	P: 13 × 2 C1: 10 × 2 CPP: 3 × 2	Cr,Ex	ÚFI	prof. RNDr. Jiří Spousta, Ph.D.
TNM	Numerical Methods of Image Analysis	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
TOI	Optoelectronics and Integrated Optics	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚFI	prof. RNDr. Jiří Petráček, Dr.
TOJ	Diploma Project I (N-FIN)	cs	7	CPP: 13 × 8	Cr	ÚFI	prof. RNDr. Tomáš Šikola, CSc.
TOM	Macromolecular Chemistry	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	RNDr. Michaela Šimšíková, Ph.D.
TOP	Diploma Project I (N-PMO)	cs	5	CPP: 13 × 5	Cr	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
TPE	Computers in Experiments	cs	2	P: 13 × 1 CPP: 13 × 1	GCr	ÚFI	Ing. Jakub Zlámal, Ph.D.
TPX	Planning and Evaluation of Experiments	cs	2	P: 13 × 1 C1: 13 × 1	GCr	ÚFI	doc. Ing. Miroslav Bartošík, Ph.D.
TPY	Programming in Python	cs	2	P: 13 × 2 CPP: 13 × 1	Cr	ÚFI	doc. Ing. Miroslav Bartošík, Ph.D.
TQS	Quantum and Statistical Physics	cs	8	P: 13 × 5 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Petr Dub, CSc.
TSI	Advanced Experimental Methods II	cs	5	L: 13 × 3	GCr	ÚFI	Ing. Michal Urbánek, Ph.D.
TSO	Advanced Experimental Methods in Optics	cs	5	L: 13 × 3	GCr	ÚFI	Mgr. Věra Kollárová, Ph.D.
TTV	Vacuum Physics and Technology	cs	3	P: 13 × 2 C1: 10 × 1 CPP: 3 × 1	Cr,Ex	ÚFI	prof. RNDr. Jiří Spousta, Ph.D.
TUN	Introduction to Physical Engineering and Nanosciences	cs	2	P: 13 × 1 C1: 6 × 1 CPP: 7 × 1	Col	ÚFI	prof. RNDr. Jiří Spousta, Ph.D.
TZO	Fundaments of Optics	cs	6	P: 13 × 2 L: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
T1T-A	Surface and Thin Films	en	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Tomáš Šikola, CSc.
T2K	Mathematics - Selected Topics II	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
UOZ	Renewable Energy Sources	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
VAI	Artificial Intelligence Algorithms	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	prof. Ing. Radomil Matoušek, Ph.D.
VAM	Introduction to Programmable Logic Controlles	cs	5	P: 13 × 1 L: 13 × 3	GCr	ÚAI	Ing. et Ing. Stanislav Lang, Ph.D.
VAU	Electrical and Pneumatic Automation Systems	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Pavel Škrabánek, Ph.D.
VA1	Control Theory I	cs	6	P: 13 × 3 L: 4 × 2 CPP: 9 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Miloš Šeda, Ph.D.
VBC	Bio-inspired Computing	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚAI	prof. Ing. Radomil Matoušek, Ph.D.
VCP	Algorithms and Programming Techniques	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Jan Roupec, Ph.D.
VHT	Hardware and Microprocessor Technique	cs	3	P: 13 × 2 L: 7 × 2 CPP: 6 × 2	GCr	ÚAI	Ing. Jan Knobloch, Ph.D.
VMD	Sensorics, Measurment and Industrial Diagnostics	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Miloš Hammer, CSc.
VOU	Computing Methods in Optimization Problems	cs	7	P: 13 × 2 CPP: 13 × 3	GCr	ÚAI	Ing. Jakub Kůdela, Ph.D.
VPG	Computers and Graphics	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚAI	Ing. Radek Poliščuk, Ph.D.
VPL	Programmable Controller Systems (PLC)	cs	4	P: 13 × 1 L: 13 × 3	GCr	ÚAI	Ing. Radek Poliščuk, Ph.D.
VPP	Optimization Methods II	cs	5	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚAI	Ing. Jakub Kůdela, Ph.D.
VSP	Simulation, Planning and Scheduling in Manufacturing	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚAI	doc. Ing. Simeon Simeonov, CSc.
VSV	Machine Vision	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Jiří Šťastný, CSc.
VTM	Technical Measurement	cs	7	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Miloš Hammer, CSc.
VZI	Mathematical Principles of Computer Science	cs	6	P: 13 × 4 CPP: 13 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Miloš Šeda, Ph.D.
VZR	Introduction to Automatic Control	cs	4	P: 13 × 3 L: 4 × 2 CPP: 9 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Miloš Šeda, Ph.D.
V0R	Virtual Reality	cs	3	P: 13 × 1 CPP: 13 × 2	GCr	ÚAI	doc. Ing. Pavel Škrabánek, Ph.D.
WAM	Applied Mechanics	cs	5	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚMTMB	prof. RNDr. Michal Kotoul, DrSc.
WA2	Methods of Structure Analysis II	cs	5	P: 13 × 2 L: 13 × 2	GCr	ÚMVI	Ing. Ondřej Man, Ph.D.
WCH	Synthesis of Nonmetallic Materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Klára Částková, Ph.D.
WCM	Chemistry	cs	6	P: 13 × 3 L: 13 × 1	Cr,Ex	ÚMVI	doc. Ing. David Salamon, Ph.D.
WCT	Chemical Thermodynamics and Kinetics	cs	4	P: 13 × 2 L: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚMVI	prof. RNDr. Karel Maca, Dr.
WEM	Experimental Methods in Materials Engineering	cs	5	P: 13 × 2 L: 9 × 3 C1: 4 × 3	Cr,Ex	ÚMVI	Ing. Lenka Klakurková, Ph.D.
WFF	Solid State Physics	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	prof. Mgr. Miroslav Černý, Ph.D.
WFR	Fractography	cs	3	P: 13 × 2 L: 13 × 1	GCr	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
WFZ	Physical and Chemical Base of Production of Metallic Materials	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚST	doc. Ing. Antonín Záděra, Ph.D.
WKM	Metallic Materials	cs	8	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚMVI	Ing. Martin Juliš, Ph.D.
WKO	Corrosion and Anticorrosion Protection	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚMVI	doc. Ing. David Salamon, Ph.D.
WMK	Modern Quality Management	cs	3	P: 13 × 2	Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
WMQ	Materials Modelling II	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Roman Gröger, Ph.D. et Ph.D.
WNE	Nonmetallic Materials	cs	7	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	prof. RNDr. Karel Maca, Dr.
WNK	Processing of Nonmetallic Materials	cs	5	P: 13 × 2 L: 13 × 1	GCr	ÚMVI	prof. Ing. Martin Trunec, Dr.
WON	Image Analysis in Material Science	cs	5	P: 13 × 2 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚM	doc. Ing. Pavel Štarha, Ph.D.
WPK	Ceramic Materials	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚMVI	Ing. Daniel Drdlík, Ph.D.
WPL	Polymers	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. RNDr. Jiří Tocháček, CSc.
WST	Heat Treatment of Metalic Materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Miloslav Kouřil, CSc.
WTE	Technology (Forming, Machining)	cs	3	P: 13 × 2 L: 13 × 2	GCr	ÚST	prof. Ing. Milan Forejt, CSc.
WTV	Technological Properties of Materials	cs	5	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚMVI	doc. Ing. Vít Jan, Ph.D.
WZ1	Materials Testing and Evaluation	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
XAK	Quality System Audits	cs	3	P: 13 × 3	GCr	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
XAP	Applied Statistics and Design of Experiments	cs	3	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	Ing. Pavel Hrabec, Ph.D.
XBA	Advanced Methods of Safety Analysis	cs	4	P: 13 × 1 C1: 13 × 1	GCr	ÚVSSR	Ing. Luboš Kotek, Ph.D.
XEV	European Law and Market Supervison	cs	2	P: 13 × 2	Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
XFB	Functional Safety	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚVSSR	doc. Dr. Ing. Daniel Prostredník, CSc.
XPT	Practical Metrology	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
XT2	Technical Diagnostics II	cs	6	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
XZK	Testing	cs	4	P: 13 × 1 L: 13 × 1	GCr	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
YAE	Applied Ergonomics	cs	4	P: 3 × 2 A: 11 × 3	GCr	ÚK	Ing. Dana Rubínová, Ph.D.
YA1	Industrial Design I	cs	5	A: 13 × 6	GCr	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YDD	History of Design	cs	3	P: 13 × 2	Ex	ÚK	doc. Ing. arch. Jan Rajlich
YDE	Design of Machines and Instruments	cs	7	A: 13 × 8	GCr	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YDF	Introduction to Design	cs	2	P: 13 × 1 A: 13 × 2	GCr	ÚK	doc. Ing. arch. Jan Rajlich
YER	Ergonomics	cs	4	P: 13 × 1 A: 13 × 2	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YE1	Design Project Concept	cs	10	A: 13 × 13	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YE3	Design Project Realization	cs	8	A: 13 × 12	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YKG	Geometric Objects Drawing	cs	1	A: 13 × 2	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YKV	Drawing of Product	cs	2	A: 13 × 2	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YMA	Marketing	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚK	doc. Ing. Lucie Kaňovská, Ph.D.
YMM	Marketing and Management in Design	cs	4	P: 13 × 2 A: 10 × 3	Cr,Ex	ÚK	doc. Ing. arch. Jan Rajlich
YM1	Modelling	cs	3	A: 13 × 3	GCr	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YN1	Science of Colour and Light	cs	2	A: 13 × 2	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YPB	Computer Graphics I	cs	2	CPP: 13 × 3	GCr	ÚK	Ing. David Škaroupka, Ph.D.
YPI	Computer Graphics II	cs	3	CPP: 13 × 3	GCr	ÚK	doc. Ing. arch. Jan Rajlich
YRP	Generative Design and Digital Production	cs	2	CPP: 13 × 2	GCr	ÚK	Ing. David Škaroupka, Ph.D.
YSD-A	Sustainable Design	en	4	P: 4 × 3 A: 11 × 4	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YU3	History of Art up to 18th Century	cs	3	P: 13 × 3	Ex	ÚK	doc. Ing. Jiří Tauber, Ph.D.
YVC-A	Visual Communication	en	4	P: 13 × 1 A: 13 × 3	Cr,Ex	ÚK	doc. Ing. arch. Jan Rajlich
YZ1	Mass Study	cs	2	A: 13 × 3	GCr	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
ZAP	Analytical Project	cs	10	L: 13 × 6 CPP: 12 × 7	Cr,Ex	ÚK	doc. Ing. Milan Klapka, Ph.D.
ZAT-A	Additive Technologies	en	4	P: 8 × 2 L: 8 × 2 CPP: 8 × 2	Cr,Ex	ÚK	doc. Ing. Daniel Koutný, Ph.D.
ZBS	Biomechanic Systems	cs	5	P: 8 × 2 L: 6 × 2 CPP: 10 × 2	Cr,Ex	ÚK	prof. Ing. Martin Vrbka, Ph.D.
ZEM	Measurement and Experiment	cs	4	P: 8 × 2 L: 8 × 4	Cr,Ex	ÚK	doc. Ing. Ivan Mazůrek, CSc.
ZES	Experiment, Measurement and Statistics	cs	5	P: 13 × 2 L: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚK	doc. Ing. Michal Kubík, Ph.D.
ZKM	Engineering Materials	cs	5	P: 13 × 2 L: 2 × 2 CPP: 11 × 2	Cr,Ex	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
ZKR	Research and Development Project	cs	10	L: 12 × 8 CPP: 13 × 4	Cr,Ex	ÚK	prof. Ing. Ivan Křupka, Ph.D.
ZM1	CAD Modeling	cs	4	P: 8 × 2 CPP: 8 × 4	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
ZP5	Project - Machine Analysis	cs	5	P: 3 × 5 L: 4 × 5 CPP: 6 × 5	Cr,Ex	ÚK	doc. Ing. Milan Klapka, Ph.D.
ZP7	Project - Mechanical System Design	cs	11	P: 2 × 8 CPP: 11 × 8	Cr,Ex	ÚK	doc. Ing. David Nečas, Ph.D.
ZP9	Project - Computer Aided Engineering	cs	10	P: 2 × 8 CPP: 11 × 8	Cr,Ex	ÚK	doc. Ing. David Nečas, Ph.D.
ZRI	3D Metrology and Inspection	cs	4	P: 8 × 2 L: 8 × 2 CPP: 8 × 2	Cr,Ex	ÚK	Ing. Tomáš Koutecký, Ph.D.
ZRS	Project Management	cs	3	P: 4 × 2 C1: 6 × 2 CPP: 3 × 2	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
ZSY-A	Finite Element Method - Structural Analyses	en	4	P: 8 × 2 CPP: 8 × 4	Cr,Ex	ÚK	doc. Ing. Pavel Maňas, Ph.D.
ZUI	Introduction to Engineering	cs	3	P: 8 × 1 CPP: 5 × 1	GCr	ÚK	prof. Ing. Martin Hartl, Ph.D.
Z1M	Mathematics 1	cs	5	P: 13 × 2 C1: 13 × 3	Cr,Ex	ÚM	doc. Ing. Jiří Šremr, Ph.D.
0MS	Mathematical Software	cs	3	CPP: 13 × 2	Cr	ÚM	doc. Ing. Petr Tomášek, Ph.D.
0N1	Technical German 1	de	2	Cj: 13 × 2	Cr	ÚJ	Mgr. et Mgr. Monika Ryšavá
0PPR	Industrial Project (N-IMB)	cs	5	PX: 1 × 120	GCr	ÚMTMB	doc. Ing. Vladimír Fuis, Ph.D.
0PPS	Industrial Project (N-MAI)	cs	2	PX: 1 × 120	Cr	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
0TH	Introduction to Game Theory	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	doc. Mgr. Jaroslav Hrdina, Ph.D.
0TH-A	Introduction to Game Theory	en	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	doc. Mgr. Jaroslav Hrdina, Ph.D.
1IN	Computer Science	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚAI	prof. Ing. Radomil Matoušek, Ph.D.
1K	Engineering Drawing Fundamentals	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚK	doc. Ing. Petr Svoboda, Ph.D.
1KD	Constructive Geometry	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Ing. Pavel Štarha, Ph.D.
1M	Mathematics I	cs	9	P: 13 × 4 C1: 11 × 4 CPP: 2 × 4	Cr,Ex	ÚM	prof. RNDr. Miroslav Doupovec, CSc., dr. h. c.
1PA	Introduction to Programming and Algorithmization	cs	6	P: 13 × 2 CPP: 13 × 2	GCr	ÚMTMB	doc. Ing. Robert Grepl, Ph.D.
1SI	Introduction to Mechanical Engineering	cs	3	P: 13 × 2	GCr	FSI	prof. Ing. Josef Štětina, Ph.D.
1ZM	Principles of Measurement in Engineering	cs	6	P: 13 × 2 L: 13 × 2	GCr	ÚFI	doc. Ing. Stanislav Průša, Ph.D.
2VT	Manufacturing Technology I	cs	4	P: 13 × 2 L: 11 × 2 C1: 2 × 2	Cr,Ex	ÚST	Ing. Michaela Císařová, Ph.D.
3CC	CAD - Advanced	cs	2	CPP: 13 × 2	Cr	ÚK	Ing. David Košťál, Ph.D.
3CD	CAD	cs	2	CPP: 13 × 2	Cr	ÚK	doc. Ing. Petr Svoboda, Ph.D.
3CD-A	CAD	en	2	CPP: 13 × 2	Cr	ÚK	doc. Ing. Petr Svoboda, Ph.D.
3F	Physics II	cs	8	P: 13 × 3 L: 13 × 2 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Pavel Šandera, CSc.
3M	Mathematics III	cs	8	P: 13 × 3 C1: 13 × 3 CPP: 13 × 1	Cr,Ex	ÚM	prof. Mgr. Pavel Řehák, Ph.D.
3ST	Statics	cs	5	P: 13 × 2 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Vladimír Fuis, Ph.D.
3SV	Structure and Properties of Materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Vít Jan, Ph.D.
3VT	Production Technology II	cs	2	L: 13 × 2	GCr	ÚST	prof. Ing. Miroslav Píška, CSc.
4PP	Strength of Materials I	cs	7	P: 13 × 4 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
5DT	Dynamics	cs	5	P: 13 × 2 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Stanislav Věchet, Ph.D.
5EM	Economics and Business Management	cs	4	P: 13 × 2 C1: 13 × 2	GCr	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
5FM	Materials Physics	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Martin Zelený, Ph.D.
5FM-A	Materials Physics	en	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Martin Zelený, Ph.D.
5HY	Hydromechanics	cs	6	P: 13 × 3 C1: 9 × 2 CPP: 4 × 2	Cr,Ex	EÚ	doc. Ing. Jaroslav Štigler, Ph.D.
5KS	Machine Design - Machine Elements	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
5KS-A	Machine Design - Machine Elements	en	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
5PP	Strength of Materials II	cs	5	P: 13 × 3 K: 13 × 2 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚMTMB	doc. Ing. František Šebek, Ph.D.
5PP-A	Strength of Materials II	en	5	P: 13 × 3 K: 13 × 2 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚMTMB	doc. Ing. František Šebek, Ph.D.
6AA	Automation	cs	5	P: 13 × 2 L: 2 × 2 CPP: 11 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Miloš Šeda, Ph.D.
6EE	Electrical Engineering and Electronics	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Rostislav Huzlík, Ph.D.
6KM	Design and 3D Print	cs	4	P: 13 × 2 L: 6 × 2 CPP: 7 × 2	GCr	ÚK	prof. Ing. Martin Hartl, Ph.D.
6KP	Solution of Basic Problems of Solids Mechanics by FEM	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
6KP-A	Solution of Basic Problems of Solids Mechanics by FEM	en	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
6MS	Limit States of Materials and Structures	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
6MS-A	Limit States of Materials and Structures	en	4	P: 13 × 2 L: 13 × 2	GCr	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
6TT	Thermomechanics	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	prof. Ing. Josef Štětina, Ph.D.
6TT-A	Thermomechanics	en	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	prof. Ing. Josef Štětina, Ph.D.
6T3	Technology III	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚST	Ing. Kamil Podaný, Ph.D.

Overview	winter semester		summer semester	total
total number of credits	1889		0	1889
average number of lessons per week	1605	,54	0	802	,77
average number of exams	268		0	268

Address:

Faculty of Mechanical Engineering
Brno University of Technology
Technická 2896/2
616 69 Brno
Czech Republic

Phone:

+420 541 14n nnn
+420 726 81n nnn – GSM Telef. O2
+420 604 07n nnn – GSM T-mobile
Operator: nnnn = 1111

Curriculum

Address:

Phone:

Contacts:

Interesting links: