Curriculum

Academic year 2025/2026

Branch: CLS	Grade: 1
full-time study	Year: 1

Course			Credits	Scope	Assesment	Superv. Inst.	Supervisor
summer semester
Elective
BF	Physics	cs	7	P: 13 × 2 L: 7 × 2 C1: 6 × 2	Cr,Ex	ÚFI	prof. Mgr. Miroslav Černý, Ph.D.
BM	Mathematics II-B	cs	7	P: 13 × 3 C1: 11 × 3 CPP: 2 × 3	Cr,Ex	ÚM	doc. Mgr. Zdeněk Opluštil, Ph.D.
BUM	Introduction to Material Science and Engineering	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Vít Jan, Ph.D.
CKS	Aircraft Structure and Systems I	cs	3	P: 13 × 2	GCr	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
CTD	Technical Diagnostic Fundamentals	cs	6	P: 13 × 3 L: 13 × 1 C1: 9 × 1 CPP: 4 × 1	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
CTT	Technology of Forming	cs	5	P: 13 × 2 L: 13 × 3	Cr,Ex	ÚST	Ing. Kamil Podaný, Ph.D.
DLA	English in Aviation II	en	3	P: 13 × 1 Cj: 13 × 1	Cr,Ex	ÚJ	Mgr. Petr Klouda
DLD	Logistics of Transport and Handling Systems	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	Ing. Jaroslav Kašpárek, Ph.D.
DLM	Aeronautical Meteorology	cs	6	P: 13 × 4 C1: 13 × 2	Cr,Ex	LÚ	doc. Ing. Ivo Jebáček, Ph.D.
DLT	Fundamentals of Aircraft Structures	cs	3	P: 13 × 2	GCr	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
DMR	Risk Management Fundamentals	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
DPI	Process Systems Engineering	cs	4	P: 13 × 2 C1: 13 × 1	GCr	ÚPI	prof. Ing. Zdeněk Jegla, Ph.D.
DRN	Radio Navigation I	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	LÚ	Ing. Miroslav Červenka, Ph.D.
DST	Power Machines	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
DTB	Machining Technology	cs	6	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	prof. Ing. Josef Sedlák, Ph.D.
DTM	Engineering Mechanics	cs	6	P: 13 × 4 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	ÚMTMB	doc. Ing. Stanislav Věchet, Ph.D.
DTP	Thermal Processes	cs	4	P: 13 × 2 C1: 7 × 2 CPP: 6 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
DZM	Testing of Materials and Products	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Josef Zapletal, Ph.D.
EDE	Degradation Processes in Engineering Materials	cs	9	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
ELE	Aviation Law and Regulations II	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Jiří Chlebek, Ph.D.
ELN	English Aerial Phraseology	cs	4	P: 13 × 2 CPP: 13 × 1	GCr	LÚ	Ing. Ondřej Beneš
EMM	Mechanisation and Automation	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚST	Ing. Miroslav Jopek, Ph.D.
ESM	Powertrains	cs	4	P: 13 × 3 L: 13 × 1	Cr,Ex	ÚADI	prof. Ing. Josef Štětina, Ph.D.
EVZ	Heating and Heat Sources	cs	3	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
FAC	CAM Application in Technologies	cs	3	P: 13 × 2 CPP: 13 × 2	GCr	ÚST	Ing. Martin Slaný, Ph.D.
FAU	Motor Vehicles	cs	4	P: 13 × 3 L: 13 × 1	GCr	ÚADI	doc. Ing. Petr Porteš, Ph.D.
FaVU.AUP	Copyright	cs	1	P: 2 × 2 C1: 2 × 2	Cr	FaVU	MgA. Katarína Magid Hládeková, Ph.D.
FHY	Hydraulic Machines	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Simona Fialová, Ph.D.
FLE	Aircraft	cs	4	P: 13 × 2 C1: 13 × 1	GCr	LÚ	Ing. František Löffelmann, Ph.D.
FLE-A	Aircraft	en	4	P: 13 × 2 C1: 13 × 1	GCr	LÚ	Ing. František Löffelmann, Ph.D.
FLP	Flight Planning and Performing	cs	7	P: 13 × 4 C1: 13 × 2	Cr,Ex	LÚ	Ing. Mgr. Pavel Imriš, Ph.D.
FOA-A	Optimization Methods I	en	5	P: 13 × 3 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚAI	doc. Ing. Jakub Kůdela, Ph.D.
FPA	Plastics in Mechanical Engineering	cs	3	P: 13 × 2 L: 7 × 2 CPP: 6 × 2	GCr	ÚST	Ing. Kamil Podaný, Ph.D.
FRO	Commissioning of Robotic Workplaces	cs	6	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Jan Vetiška, Ph.D.
FSE	Combustion Devices and Air Protection	cs	4	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
FST	Construction of Energy Facilities	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	EÚ	Ing. Petr Kracík, Ph.D.
GAR	Electrical Elements of Automatic Control of Production Systems	cs	6	P: 13 × 2 L: 13 × 3	Cr,Ex	ÚVSSR	Ing. František Bradáč, Ph.D.
GAS	Automatic Control of Machines	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. František Bradáč, Ph.D.
GEN2	General English II	en	0	Cj: 13 × 2 CPP: 13 × 1	Cr	ÚJ	Mgr. Dita Gálová, Ph.D.
GEN3	General English Exam	en	2	K: 1 × 1	Ex	ÚJ	Mgr. Dita Gálová, Ph.D.
GES	Electrical Servodrives	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Rostislav Huzlík, Ph.D.
GEV	Electrical Engineering of Production Machines	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Rostislav Huzlík, Ph.D.
GIF	Information Systems and Computer Networks	cs	4	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
GMB	Sensors for Control and Measuring Circuits	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Pavel Houška, Ph.D.
GMQ	Module Project II	cs	5	C1: 13 × 4	GCr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GMS	Modelling and Simulation of Production Machines	cs	4	CPP: 13 × 3	GCr	ÚVSSR	Ing. Tomáš Marada, Ph.D.
GMV	Modelling and Simulation of Production Systems	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Jiří Kovář, Ph.D.
GNP	Robotics Workcells Designing and Programming	cs	6	L: 13 × 4	GCr	ÚVSSR	Ing. Jan Vetiška, Ph.D.
GPL	Industrial Robots and Manipulators II	cs	4	P: 13 × 2	Ex	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
GRV	Design of Control Systems	cs	4	CPP: 13 × 3	GCr	ÚVSSR	Ing. Jan Vetiška, Ph.D.
GSC	CNC Machining Strategies	cs	4	L: 13 × 2 CPP: 13 × 2	GCr	ÚVSSR	Ing. Aleš Polzer, Ph.D.
GSZ	Data Processing	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
GTC	Technological Aspects of Design and Retrofitting of Production Machines	cs	2	P: 13 × 2	Ex	ÚVSSR	Ing. Jan Pavlík, Ph.D.
GTN	Machining and Forming Theory and Tools	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚST	prof. Ing. Milan Forejt, CSc.
G3S	Construction of Production Machines II	cs	4	P: 13 × 2	Ex	ÚVSSR	prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng.
HC2	Advanced CAM Applications in Technologies	cs	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚST	doc. Ing. Jan Zouhar, Ph.D.
HDS	Tax System	cs	7	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚST	doc. Ing. Mgr. Karel Brychta, Ph.D.
HME	Mechanisation, Automation and Handling	cs	4	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚST	prof. Ing. Radim Kocich, Ph.D.
HMR	Industrial Marketing	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	doc. Ing. Vít Chlebovský, Ph.D.
HMT	Engineering Materials and Heat Treatment	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
HNP	Processes, Jigs and Tools in Machining Technology	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	Ing. Oskar Zemčík, Ph.D.
HOS	Lighting Systems	cs	6	P: 13 × 2 L: 5 × 4 CPP: 6 × 1	Cr,Ex	ÚST	Ing. Jan Škoda, Ph.D.
HPR	Simulation of Technological Processes	cs	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚST	Ing. Jan Řiháček, Ph.D.
HPU	Recovery and Surface Treatment	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Radim Kocich, Ph.D.
HRA	Additive Technologies and 3D Scanning Methods	cs	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚST	doc. Ing. Jan Zouhar, Ph.D.
HSI	Simulation and Testing of Products	cs	4	P: 12 × 2 L: 1 × 2	GCr	ÚST	František Samek
HSM	Strategic Management	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚST	doc. Ing. Pavla Marciánová, Ph.D.
HTA	Theory of Metal-forming	cs	6	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Miroslav Jopek, Ph.D.
HTN	Forming Tools	cs	4	P: 13 × 3 CPP: 13 × 3	Cr,Ex	ÚST	prof. Ing. Radim Kocich, Ph.D.
HTO	Theory of Machining	cs	6	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Karel Kouřil, Ph.D.
HTR	Selected Chapters from Machining	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	prof. Ing. Josef Sedlák, Ph.D.
HUP	Tool Jigs and Fixtures for Machining	cs	4	P: 13 × 3 L: 13 × 3	Cr,Ex	ÚST	Ing. Oskar Zemčík, Ph.D.
HVT	Selected Chapters of Metal-forming	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Miroslav Jopek, Ph.D.
IAE	Aerosols	cs	3	P: 13 × 1 CPP: 13 × 1	Cr,Ex	EÚ	doc. Ing. František Lízal, Ph.D.
IAK	Application of HVAC Systems	cs	3	P: 13 × 1 CPP: 13 × 1	Cr,Ex	EÚ	doc. Ing. Bc. Jan Fišer, Ph.D.
ICA	Building Information Models – Designing	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	EÚ	prof. Ing. Josef Štětina, Ph.D.
IEE	Experimental Methods II	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	prof. Ing. Jan Jedelský, Ph.D.
IEM	Experimental Methods	cs	5	P: 13 × 2 L: 13 × 2	GCr	EÚ	doc. Ing. František Lízal, Ph.D.
IET	Environmental Technology	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
IIB	Inteligent Buildings	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	doc. Ing. Tomáš Mauder, Ph.D.
IKB	Energy use of Biomass and Waste	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
ITM	Heat Transfer and Fluid Flow Simulations	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	EÚ	doc. Ing. Jaroslav Katolický, Ph.D.
KCD	CAD Process Simulations	cs	3	CPP: 13 × 3	Cr	ÚPI	prof. Ing. Zdeněk Jegla, Ph.D.
KEE-A	Energy and Emissions	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	prof. Ing. Petr Stehlík, CSc., dr. h. c.
KFE	Introduction to FEM	cs	3	CPP: 13 × 3	Cr	ÚPI	doc. Ing. Vojtěch Turek, Ph.D.
KKR	Construction of Process Equipment II	cs	6	P: 13 × 2 CPP: 13 × 3	Cr,Ex	ÚPI	prof. Dr. Ing. Marcus Reppich
KMP	Mechanical Processes	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚPI	doc. Ing. Radovan Šomplák, Ph.D.
KOD	Waste Treatment and Recycling	cs	4	P: 13 × 1 C1: 13 × 1	GCr	ÚPI	doc. Ing. Martin Pavlas, Ph.D.
KPT	Computational Modelling of Fluid Flow	cs	3	CPP: 13 × 3	Cr	ÚPI	doc. Ing. Vojtěch Turek, Ph.D.
KRZ	Implementation of Investment Plans and Troubleshooting	cs	4	P: 13 × 1 C1: 13 × 1	GCr	ÚPI	prof. Ing. Petr Stehlík, CSc., dr. h. c.
KSZ	Design of Equipment for Process Industry	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	prof. Dr. Ing. Marcus Reppich
KS2	Technological Units for Processing Industry	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	prof. Ing. Zdeněk Jegla, Ph.D.
KS3	System Approaches for Process and Power Industry	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚPI	prof. Ing. Zdeněk Jegla, Ph.D.
K3D-A	Basics of Process Equipment Modelling in 3D	en	4	CPP: 13 × 3	GCr	ÚPI	prof. Ing. Zdeněk Jegla, Ph.D.
LAV	Automation of Calculation, Simulation and Visualization	cs	2	CPP: 13 × 2	Cr	EÚ	Ing. Libor Kudela, Ph.D.
LAZ	Alternative Energy Sources	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
LDS	Dynamics of Power Machines and Their Accessories	cs	5	P: 13 × 3 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Vladimír Habán, Ph.D.
LES	Experimental Modeling and Signal Processing	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Vladimír Habán, Ph.D.
LJE	Nuclear Power Engineering	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	Ing. Ladislav Šnajdárek, Ph.D.
LME	Nuclear Sources and Zero-emission Energy	cs	3	P: 13 × 2	GCr	EÚ	doc. Ing. Marek Baláš, Ph.D.
LMR	Measurement and Regulation in Power Engineering	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	EÚ	Ing. Pavel Milčák, Ph.D.
LMT	Advanced Fluid Mechanics	cs	4	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Jaroslav Štigler, Ph.D.
LOS	Compressors, Fans and Refrigerating Plants	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Jaroslav Katolický, Ph.D.
LPO	Pipeline Engineering	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Vladimír Habán, Ph.D.
LPZ	Operation of Power Plant Equipment	cs	6	P: 13 × 3 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
LSE	Computational Simulations for Heat and Power Production	cs	2	CPP: 13 × 2	GCr	EÚ	Ing. Michal Špiláček, Ph.D.
LTS	Combustion and Air Protection Technology	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Marek Baláš, Ph.D.
LT1	Turbines and Turbocompressors	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	doc. Ing. Jan Fiedler, Dr.
LZ1	Fundamentals of Power Engineering	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
L1D	1D Modelling in Power Engineering	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
MEL	Electrical Equipment of Energy Machines and Apparatuses	cs	4	P: 13 × 2	GCr	ÚVSSR	Ing. Rostislav Huzlík, Ph.D.
MS2	Fluid Machinery II	cs	4	P: 13 × 2 L: 13 × 1	GCr	EÚ	doc. Ing. Miloslav Haluza, CSc.
MTM	Fluid Power Modeling	cs	4	P: 13 × 1 L: 13 × 1	Cr,Ex	EÚ	prof. Ing. František Pochylý, CSc.
MVP	Computational Fluid Dynamics	cs	6	P: 13 × 3 CPP: 13 × 2	Cr,Ex	EÚ	doc. Ing. Pavel Rudolf, Ph.D.
MZH	Fluid Structure Interactions	cs	4	P: 13 × 2 L: 13 × 1	Cr,Ex	EÚ	prof. Ing. František Pochylý, CSc.
NSK	Road Building Machines	cs	6	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚADI	Ing. Jaroslav Kašpárek, Ph.D.
OAS	Autonomous Flying Systems	cs	3	P: 13 × 2 L: 2 × 1 C1: 11 × 1	GCr	LÚ	doc. Ing. Ivo Jebáček, Ph.D.
OA2	Aerodynamics II	cs	5	P: 13 × 2 L: 2 × 1 C1: 11 × 1	Cr,Ex	LÚ	Ing. Robert Popela, Ph.D.
OCF	CFD for Aerospace	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	LÚ	Ing. Robert Popela, Ph.D.
OKP	FEM for Aerospace	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	LÚ	Ing. Jan Šplíchal, Ph.D.
OLL	Airport II	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	Ing. Radomír Janík
OLP	Aviation Law and Regulations	cs	2	P: 13 × 1	Cr	LÚ	Ing. Jiří Chlebek, Ph.D.
OMZ	Flight Mechanics I	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Ivo Jebáček, Ph.D.
OPK	Aerostructures Capability	cs	5	P: 13 × 4 L: 2 × 2 C1: 11 × 2	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OPL-A	Aircraft On-Board Systems II	en	5	P: 13 × 2 L: 1 × 1 C1: 12 × 1	Cr,Ex	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
OPZ-A	Aircraft On-Board Systems I	en	4	P: 13 × 4 L: 2 × 1 C1: 11 × 1	Cr,Ex	LÚ	doc. Ing. Jiří Hlinka, Ph.D.
OP1	Operation and Economy of Air Devices I	cs	5	P: 13 × 4 C1: 13 × 1	Cr,Ex	LÚ	Ing. Jiří Chlebek, Ph.D.
ORL	Air Traffic Management	cs	5	P: 13 × 3 C1: 13 × 2	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OT1	Aircraft Manufacture	cs	5	P: 13 × 2 L: 2 × 1 C1: 11 × 1	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OT2	Spacecraft Technologies	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Jaroslav Juračka, Ph.D.
OUZ	Fatigue of Aircraft Structures	cs	4	P: 13 × 2 C1: 13 × 1	GCr	LÚ	Ing. Petr Augustin, Ph.D.
OZL	Communication, Navigation, Surveillance	cs	5	P: 13 × 4 C1: 13 × 1	Cr,Ex	LÚ	Ing. Miroslav Šplíchal, Ph.D.
OZ2	Principles of Flight II	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	LÚ	doc. Ing. Pavel Zikmund, Ph.D.
PIN-A	Simultaneous Engineering	en	4	P: 13 × 2	GCr	ÚST	prof. Ing. Milan Horáček, CSc.
PLN	Metallurgy of Nonferrous Metals	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚST	Ing. Václav Kaňa, Ph.D.
PMM	Mathematical Modelling	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚST	doc. Ing. Vladimír Krutiš, Ph.D.
PMO	Metallurgy of Steel	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
POB	Fundamentals of Foundry Theory	cs	6	P: 13 × 3 L: 7 × 2 C1: 6 × 2	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
PTC	Technological Preparation of Foundry Production	cs	6	P: 13 × 3 CPP: 13 × 3	Cr,Ex	ÚST	doc. Ing. Vladimír Krutiš, Ph.D.
PTS	Additive Technologies in Foundries	cs	5	P: 13 × 2 L: 13 × 3	Cr,Ex	ÚST	doc. Ing. Vladimír Krutiš, Ph.D.
PVD	Casting Defects and Repairs	cs	6	P: 13 × 2 L: 4 × 2 C1: 2 × 2 CPP: 7 × 2	Cr,Ex	ÚST	Ing. Václav Kaňa, Ph.D.
QDZ-A	Vibration and Noise of Vehicles	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	prof. Ing. Pavel Novotný, Ph.D.
QEC	Control units design	cs	6	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚADI	doc. Ing. Pavel Kučera, Ph.D.
QEM	Experimental Methods	cs	6	P: 13 × 2 L: 10 × 2 CPP: 3 × 2	Cr,Ex	ÚADI	prof. Ing. Josef Štětina, Ph.D.
QFB	Forensic Aspects of Safety and Vehicles	cs	3	C1: 13 × 4	Cr,Ex	ÚSI	doc. Ing. Bc. Marek Semela, Ph.D.
QMV	Motor Vehicles	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚADI	Ing. Ondřej Blaťák, Ph.D.
QN2	Supporting Structures of Machines II	cs	3	P: 13 × 1 CPP: 13 × 1	Cr,Ex	ÚADI	Ing. Přemysl Pokorný, Ph.D.
QPV	Vehicle Accessories	cs	6	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚADI	Ing. Radim Dundálek, Ph.D.
QSS	Techniques of Decreasing Industrial Harmful Substances	cs	4	P: 13 × 2	Ex	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
QS3	Semester Project	cs	6	CPP: 13 × 6	GCr	ÚADI	Ing. David Svída, Ph.D.
QT	Tractors	cs	6	P: 13 × 2 L: 7 × 2 C1: 6 × 2	Cr,Ex	ÚADI	prof. Ing. František Bauer, CSc.
QTE	Thermal Management of Vehicles	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	EÚ	doc. Ing. Bc. Jan Fišer, Ph.D.
QTZ	Transport Machines	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Jiří Malášek, Ph.D.
QVQ	Virtual Prototypes and Virtual Enviroment	cs	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	doc. Ing. Petr Porteš, Ph.D.
QZE	Earth Working Machinery	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	ÚADI	Ing. Jaroslav Kašpárek, Ph.D.
RAI	Artifical Inteligence	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	doc. Ing. Jiří Krejsa, Ph.D.
RBD	Reliability, Safety and Diagnostics of Technical Systems	cs	5	P: 13 × 3 C1: 13 × 1	Cr,Ex	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
RBI	Biomechanics II - Musculoskeletal	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚMTMB	doc. Ing. Zdeněk Florian, CSc.
RDF	Deformation and Failure of Materials	cs	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
REE	Electromechanical Conversion of Energy	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	UVEE	doc. Ing. Ondřej Vítek, Ph.D.
REN	Basics of Electrotechnics	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	UVEE	doc. Ing. Pavel Vorel, Ph.D.
REV	Application of Embedded Systems in Mechatronics	cs	5	P: 13 × 1 L: 13 × 3	GCr	ÚMTMB	doc. Ing. Robert Grepl, Ph.D.
RIT	Fluid Structure Interactions	cs	3	P: 13 × 2 C1: 13 × 1	GCr	EÚ	prof. Ing. František Pochylý, CSc.
RME	Selected Mathematical Methods in Mechanics	cs	4	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚMTMB	prof. RNDr. Michal Kotoul, DrSc.
RMF	Mechatronic Systems on Vehicles	cs	4	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚVSSR	doc. Ing. Vladislav Singule, CSc.
RMV	Modelling in Engineering Practice	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
RNU	FEM in Engineering Computations II	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	prof. Ing. Jindřich Petruška, CSc.
RPO	Real Time Control and Simulation	cs	5	P: 13 × 2 L: 13 × 2	GCr	ÚMTMB	doc. Ing. Robert Grepl, Ph.D.
RQM	Thermal Effects in Mechatronic Systems	cs	5	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚMTMB	doc. Ing. Radek Vlach, Ph.D.
RRY	Electrical Drives	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	UVEE	doc. Ing. Pavel Vorel, Ph.D.
RST	Reliability of Structures	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
RS1	3D Digital Technology and CAD	cs	5	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚK	doc. Ing. Daniel Koutný, Ph.D.
RTE	Microprocessor Control	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	UVEE	Ing. Jan Knobloch, Ph.D.
RUI	Technical Applications of Image Analysis	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
RVE	Power and Control Electronics	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	UVEE	doc. Ing. Radoslav Cipín, Ph.D.
RZI	Dynamic Measurement and Diagnostics	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMTMB	Ing. Lubomír Houfek, Ph.D.
R3D	Dynamics III - Nonlinear and Stochastic Vibration	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMTMB	prof. Ing. Zdeněk Hadaš, Ph.D.
SAV	Geometrical Algorithms and Cryptography	cs	3	P: 13 × 2	Ex	ÚM	doc. RNDr. Miroslav Kureš, Ph.D.
SA0	Dynamical Systems and Mathematical Modelling	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Jan Čermák, CSc.
SA2	Mathematical Analysis II	cs	7	P: 13 × 4 C1: 11 × 3 CPP: 2 × 3	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
SDG	Differential Geometry	cs	4	P: 13 × 2 C1: 13 × 1	GCr	ÚM	prof. RNDr. Miroslav Doupovec, CSc., dr. h. c.
SDQ-A	Diploma Seminar II (N-AIM-A)	en	2	C1: 13 × 2	Cr	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
SDR	Advanced Methods in Mathematical Analysis	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. Mgr. Pavel Řehák, Ph.D.
SDR-A	Advanced Methods in Mathematical Analysis	en	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. Mgr. Pavel Řehák, Ph.D.
SEP-A	Stochastic Models in Logistics	en	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Zuzana Hübnerová, Ph.D.
SKF	Complex Variable Functions	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
SLB	Linear Algebra II	cs	6	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Jaroslav Hrdina, Ph.D.
SLV-A	Transportation Infrastructure Planning and Simulation	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚADI	Ing. Jaroslav Kašpárek, Ph.D.
SMA-A	Mathematical Methods in Logistics	en	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	doc. Mgr. Petr Vašík, Ph.D.
SML	Mathematical Logic	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SML-A	Mathematical Logic	en	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SNF-A	Network Flows in Logistics	en	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	RNDr. Pavel Popela, Ph.D.
SN2	Numerical Methods II	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. Ing. Petr Tomášek, Ph.D.
SOA	General Algebra	cs	5	P: 13 × 2 C1: 11 × 2 CPP: 2 × 2	Cr,Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SOP	Optimization I	cs	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	RNDr. Pavel Popela, Ph.D.
SOR-A	Fundamentals of Optimal Control Theory	en	5	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	prof. RNDr. Jan Čermák, CSc.
SOU-A	Computing Methods in Logistics Optimization Problems	en	6	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Jakub Kůdela, Ph.D.
SO2-A	Optimization Models II	en	4	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	RNDr. Pavel Popela, Ph.D.
SPD	Partial Differential Equations	cs	5	P: 13 × 2 C1: 13 × 2	Cr,Ex	ÚM	doc. Mgr. Zdeněk Opluštil, Ph.D.
SPJ	Programming Language Java	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚM	Ing. Pavla Sehnalová, Ph.D.
SPT	Programming Techniques	cs	3	P: 13 × 1 CPP: 13 × 2	GCr	ÚM	doc. Ing. Pavel Štarha, Ph.D.
SR0	Reconstruction and Analysis of 3D Scenes	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚM	Mgr. Jana Procházková, Ph.D.
SSP	Stochastic Processes	cs	5	P: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	doc. Mgr. Zuzana Hübnerová, Ph.D.
SSR-A	Mathematical Structures	en	4	P: 13 × 2	Ex	ÚM	prof. RNDr. Josef Šlapal, CSc.
SVD	Data Visualisation	cs	5	P: 13 × 1 CPP: 13 × 2	GCr	ÚM	Mgr. Jana Procházková, Ph.D.
S1M-A	Calculus of Variations	en	4	P: 13 × 2 C1: 13 × 1	GCr	ÚM	doc. RNDr. Miroslav Kureš, Ph.D.
S1P	Probability and Statistics I	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚM	doc. RNDr. Libor Žák, Ph.D.
TAI	Analysis of Engineering Experiment	cs	5	P: 13 × 2 CPP: 13 × 1	GCr	ÚM	Ing. Pavel Hrabec, Ph.D.
TA2	Mathematical Analysis II F	cs	7	P: 13 × 4 C1: 11 × 3 CPP: 2 × 3	Cr,Ex	ÚM	doc. Ing. Luděk Nechvátal, Ph.D.
TCH	Laboratory Experiments on Chemistry	cs	4	L: 13 × 2	GCr	ÚFI	Ing. Radoslav Novotný, Ph.D.
TCS	Optical Design	cs	3	P: 13 × 1 CPP: 13 × 2	GCr	ÚFI	Ing. Zbyněk Dostál, Ph.D.
TDE	Electrodynamics and Special Theory of Relativity	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Petr Dub, CSc.
TDN-A	Diagnostics of Nanostructures	en	4	P: 13 × 1 L: 3 × 2 C1: 7 × 2 CPP: 3 × 2	Col	ÚFI	prof. Ing. Jan Čechal, Ph.D.
TEN2	Technical English II	en	0	Cj: 13 × 2	Cr	ÚJ	Mgr. Jaroslav Trávníček
TEN3	Technical English Exam	en	4	K: 1 × 1	Ex	ÚJ	Mgr. Dita Gálová, Ph.D.
TFO	Fourier Methods in Optics	cs	7	P: 13 × 2 C1: 13 × 3	Cr,Ex	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
TFS	Numerical Simulations in Physics	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚFI	doc. Ing. Jakub Zlámal, Ph.D.
TF2	General Physics II (Electricity and Magnetism)	cs	7	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Jiří Spousta, Ph.D.
TF4	General Physics IV (Modern Physics)	cs	6	P: 13 × 3 C1: 11 × 2 CPP: 2 × 2	Cr,Ex	ÚFI	prof. Ing. Miroslav Kolíbal, Ph.D.
TKC	Introduction to Optomechanics	cs	3	P: 13 × 2 C1: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚFI	Ing. Zbyněk Dostál, Ph.D.
TK2	Design of Instruments and Optomechanics II	cs	7	P: 13 × 2 CPP: 13 × 3	Col	ÚFI	prof. Ing. Ivan Křupka, Ph.D.
TMT	Nanostructured Materials	cs	4	P: 13 × 2 L: 3 × 1 C1: 10 × 1	Col	ÚMVI	prof. RNDr. Karel Maca, Dr.
TNM-A	Numerical Methods of Image Analysis	en	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
TNS	Technology of Low Dimensional Structures	cs	3	P: 13 × 2 L: 3 × 1 C1: 7 × 1 CPP: 3 × 1	Col	ÚFI	prof. Ing. Miroslav Kolíbal, Ph.D.
TOV	Technology of Optical Production	cs	4	P: 13 × 1 L: 13 × 2	Col	ÚFI	Ing. Zbyněk Dostál, Ph.D.
TPL	Solid State Physics	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	ÚFI	prof. RNDr. Petr Dub, CSc.
TPZ-A	Principles of Equipment for Physical Technologies	en	3	P: 13 × 2 C1: 6 × 1 CPP: 7 × 1	Cr,Ex	ÚFI	prof. RNDr. Tomáš Šikola, CSc.
TR1	Physical Laboratory I	cs	2	L: 13 × 2	GCr	ÚFI	prof. Mgr. Miroslav Černý, Ph.D.
TR3	Physical Laboratory III	cs	3	L: 13 × 3	GCr	ÚFI	doc. Ing. Stanislav Průša, Ph.D.
TS	Advanced Experimental Methods I	cs	4	L: 13 × 3	GCr	ÚFI	doc. Ing. Stanislav Průša, Ph.D.
TSM	Chemical Structure Modeling	cs	3	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚFI	RNDr. Petr Kulhánek, Ph.D.
TSN	Specialised Seminar (N-FIN)	cs	3	C1: 13 × 2	Cr	ÚFI	prof. RNDr. Petr Dub, CSc.
TSS	Specialised Seminar (N-PMO)	cs	3	C1: 13 × 2	Cr	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
TSY	MEMS and NEMS Systems	cs	3	P: 13 × 1 CPP: 13 × 1	GCr	ÚFI	doc. Ing. Stanislav Průša, Ph.D.
TVN	Structure and Properties of Advanced Materials	cs	3	P: 13 × 1 C1: 13 × 1 CPP: 13 × 1	Cr,Ex	ÚFI	prof. Mgr. Miroslav Černý, Ph.D.
TVP	Scientific project	cs	4	L: 13 × 4	GCr	ÚFI	Ing. Petr Bouchal, Ph.D.
TZN	Fundamentals of Nanoscience	cs	4	P: 13 × 2 C1: 10 × 1 CPP: 3 × 1	Cr,Ex	ÚFI	doc. Mgr. Vlastimil Křápek, Ph.D.
T1K	Mathematics - Selected Topics I	cs	3	P: 13 × 2 C1: 13 × 1	Cr,Ex	ÚM	prof. RNDr. Miloslav Druckmüller, CSc.
VAI	Artificial Intelligence Algorithms	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	prof. Ing. Radomil Matoušek, Ph.D.
VI4	Digitalization in Industry	cs	5	P: 13 × 2 CPP: 13 × 2	GCr	ÚAI	prof. Ing. Zdeněk Hadaš, Ph.D.
VMD	Industrial Systems Diagnostics	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Miloš Hammer, CSc.
VOB	Object-Oriented Programming	cs	3	P: 13 × 1 CPP: 13 × 2	GCr	ÚAI	Ing. Jiří Kovář, Ph.D.
VOU-A	Computing Methods in Optimization Problems	en	7	P: 13 × 2 CPP: 13 × 3	Cr,Ex	ÚAI	doc. Ing. Jakub Kůdela, Ph.D.
VPD	Python Programming – Data Science	cs	4	P: 13 × 2 CPP: 13 × 2	GCr	ÚAI	Ing. Jiří Kovář, Ph.D.
VPR	Automatic Control Equipment	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Pavel Škrabánek, Ph.D.
VP0	Programming in Python	cs	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	Ing. Jiří Kovář, Ph.D.
VP0-A	Programming in Python	en	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	Ing. Jiří Kovář, Ph.D.
VRM	Programming for Robots and Manipulators	cs	4	P: 13 × 1 L: 13 × 3	GCr	ÚAI	Ing. et Ing. Stanislav Lang, Ph.D.
VSC	Neural networks and Machine Learning	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Pavel Škrabánek, Ph.D.
VSV-A	Machine Vision	en	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚAI	doc. Ing. Pavel Škrabánek, Ph.D.
VTR	Algebraic Theory of Control	cs	3	P: 13 × 2	GCr	ÚM	doc. Mgr. Jaroslav Hrdina, Ph.D.
WA1	Methods of Structure Analysis	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Ondřej Man, Ph.D.
WDD	Dislocations and Plastic Deformation	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	prof. Mgr. Tomáš Kruml, CSc.
WDM	Degradation of Materials and Service Life Prediction	cs	5	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
WET	Elektrotechnology	cs	5	P: 13 × 2 L: 13 × 2	GCr	UETE	doc. Ing. Vítězslav Novák, Ph.D.
WEX	Experimental Methods in Materials Engineering I	cs	3	P: 13 × 1 L: 13 × 1	Cr,Ex	ÚMVI	Ing. Lenka Klakurková, Ph.D.
WFN	Functional and Nanostructural Materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	prof. Ing. Jozef Janovec, DrSc.
WKF	Theory of Complex Phase Transformations	cs	7	P: 13 × 3 L: 7 × 2 C1: 6 × 2	Cr,Ex	ÚMVI	prof. Ing. Vlastimil Vodárek, CSc.
WMO-A	Materials Modelling I	en	4	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚMVI	Ing. Martin Zelený, Ph.D.
WNZ	Non-destructive Testing of Materials	cs	8	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Martin Juliš, Ph.D.
WPI	Surface Engineering	cs	4	P: 13 × 2 L: 13 × 1	GCr	ÚMVI	prof. Ing. Ivo Dlouhý, CSc.
WSI	Structure and Properties of Engineering Materials	cs	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Pavel Doležal, Ph.D.
WTC	Technology (Metallurgy, Welding, Casting)	cs	3	P: 13 × 2 L: 13 × 1	Cr,Ex	ÚST	doc. Ing. Antonín Záděra, Ph.D.
WUF	Introduction to the Materials Physics	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	Ing. Martin Zelený, Ph.D.
WUV-A	Materials Selection and Performance	en	5	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Václav Pouchlý, Ph.D., Ing.Paed.IGIP
WZM	Testing of Materials and Structures	cs	5	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
XAM	Advanced Methods of Risk Management	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Luboš Kotek, Ph.D.
XB0	Work Safety in Electrical Engineering	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Radomír Pruša, Ph.D.
XMI	Safety Management	cs	2	P: 13 × 2	GCr	ÚVSSR	Ing. Luboš Kotek, Ph.D.
XMT	Measurement Technique	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚVSSR	doc. Dr. Ing. Daniel Prostredník, CSc.
XRI	Quality Management II	cs	3	P: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Petr Blecha, Ph.D., FEng.
XRP	Statistical Process Control	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
XS1	Reliability and Maintenance of Technical Systems	cs	6	P: 13 × 3 CPP: 13 × 3	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
XTM	Motivation Tools	cs	2	C1: 13 × 2	GCr	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
XT1	Technical Diagnostics I	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚVSSR	Ing. Daniel Zuth, Ph.D.
YAM	Advanced Materials in Design	cs	3	P: 13 × 1 A: 13 × 2	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YAN	Animation	cs	4	CPP: 13 × 4	GCr	ÚK	Ing. Filip Uhlíř
YA2	Industrial Design II	cs	5	A: 13 × 6	GCr	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YDK	Design, Culture and Society	cs	3	P: 13 × 3	Cr,Ex	ÚK	doc. Ing. Jiří Tauber, Ph.D.
YE2	Design Project Development	cs	11	A: 13 × 12	Cr,Ex	ÚK	doc. akad. soch. Ladislav Křenek, ArtD.
YIT	Studio of Interior Design	cs	5	A: 13 × 2	GCr	ÚK	Ing. Dana Rubínová, Ph.D.
YKD	Digital Drawing	cs	3	CPP: 13 × 3	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YKS	Drawing of Composition	cs	2	A: 13 × 2	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YKT	Collaborative Creative work	cs	4	P: 13 × 1 CPP: 13 × 3	GCr	ÚK	prof. Mgr. A. Pavel Noga, ArtD.
YMP	Management in the Creative Industry	cs	4	P: 13 × 1 C1: 13 × 2	Cr,Ex	ÚK	doc. Ing. Lucie Kaňovská, Ph.D.
YMT	Multimedia and Technology	cs	4	P: 13 × 1 CPP: 13 × 3	GCr	ÚK	doc. Ing. arch. Jan Rajlich
YMV	Materials and Processes for Production	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚMVI	doc. Ing. Libor Pantělejev, Ph.D.
YPF	Product Photography	cs	5	A: 13 × 3	GCr	ÚK	akad. soch. Josef Sládek, ArtD.
YPI	Computer Graphics II	cs	3	CPP: 13 × 3	GCr	ÚK	Ing. David Škaroupka, Ph.D.
YPM	Computer Modelling and Visualisation I	cs	2	CPP: 13 × 3	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
YPV	Computer Modelling and Visualisation II	cs	3	CPP: 13 × 3	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
YTG	Typography	cs	5	P: 13 × 1 A: 13 × 4	Cr,Ex	ÚK	doc. Ing. arch. Jan Rajlich
YTM	Creativity and Creative Thinking	cs	3	P: 13 × 1 A: 13 × 1	Ex	ÚK	doc. Ing. Jiří Tauber, Ph.D.
YU4	History of Art of 19th - 20th Century	cs	3	P: 13 × 3	Ex	ÚK	doc. Ing. Jiří Tauber, Ph.D.
YVR	Virtual Reality	cs	3	A: 13 × 2	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
YV1	Studio of Virtual Creativity I	cs	7	A: 13 × 6	GCr	ÚK	prof. Mgr. A. Pavel Noga, ArtD.
YV3	Studio of Virtual Creativity III	cs	8	A: 13 × 8	GCr	ÚK	doc. Ing. Jiří Tauber, Ph.D.
YWP	Web Presentation	cs	3	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚK	Ing. Filip Uhlíř
ZAE	Machine and Process Control	cs	5	P: 8 × 2 L: 8 × 4	GCr	ÚK	Ing. Zbyněk Strecker, Ph.D.
ZAW	Finite Element Method - Advanced Analyses	cs	4	P: 8 × 2 CPP: 8 × 4	Cr,Ex	ÚK	doc. Ing. Pavel Maňas, Ph.D.
ZEP	Electrical Drives and Control	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚK	doc. Ing. Michal Kubík, Ph.D.
ZIP	Mechanical Design Project	cs	8	L: 9 × 4 CPP: 12 × 10	Cr,Ex	ÚK	doc. Ing. Petr Svoboda, Ph.D.
ZMY	Engineering Thinking	cs	3	P: 9 × 2 L: 2 × 1 CPP: 6 × 1	GCr	ÚK	prof. Ing. Ivan Křupka, Ph.D.
ZNV	Exponential Technologies	cs	3	P: 13 × 2	GCr	ÚK	prof. Ing. Martin Hartl, Ph.D.
ZP6	Project - Computational Modelling	cs	6	P: 7 × 2 L: 12 × 1 CPP: 13 × 4	Cr,Ex	ÚK	Ing. Petr Šperka, Ph.D.
ZP8	Project - Mechatronic System Design	cs	7	P: 2 × 8 CPP: 11 × 8	Cr,Ex	ÚK	doc. Ing. David Nečas, Ph.D.
ZTR	Tribology	cs	5	P: 8 × 2 L: 8 × 2 CPP: 8 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
Z2M	Mathematics 2	cs	5	P: 13 × 2 C1: 13 × 3	Cr,Ex	ÚM	doc. Ing. Jiří Šremr, Ph.D.
0F6	Semestral (Industrial) Project N II	cs	5	CPP: 13 × 5	GCr	ÚFI	prof. RNDr. Jiří Spousta, Ph.D.
0KT	Air Conditioning and Heat Pumps	cs	4	P: 13 × 2 L: 13 × 1	GCr	EÚ	Ing. Jiří Hejčík, Ph.D.
0MR	Mobile Robots	cs	5	L: 13 × 3	Cr	ÚMTMB	doc. Ing. Stanislav Věchet, Ph.D.
0N2	Technical German 2	de	4	Cj: 13 × 2	Cr,Ex	ÚJ	Mgr. et Mgr. Monika Ryšavá
0PPN	Industrial Project (N-MET)	cs	5	PX: 1 × 120	GCr	ÚMTMB	doc. Ing. Vladimír Fuis, Ph.D.
2F	Physics I	cs	7	P: 13 × 3 L: 13 × 1 C1: 13 × 2	Cr,Ex	ÚFI	doc. Ing. Stanislav Průša, Ph.D.
2K	Engineering Drawing	cs	4	P: 13 × 1 CPP: 13 × 2	GCr	ÚK	Ing. David Košťál, Ph.D.
2M	Mathematics II	cs	8	P: 13 × 3 C1: 11 × 4 CPP: 2 × 4	Cr,Ex	ÚM	prof. RNDr. Miroslav Doupovec, CSc., dr. h. c.
2NU	Numerical Methods	cs	4	P: 13 × 1 CPP: 13 × 2	Cr,Ex	ÚM	doc. Ing. Petr Tomášek, Ph.D.
3ST	Statics	cs	5	P: 13 × 2 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Vladimír Fuis, Ph.D.
4KC	Design and CAD	cs	4	CPP: 13 × 2	GCr	ÚK	doc. Ing. Milan Klapka, Ph.D.
4KC-A	Design and CAD	en	4	CPP: 13 × 2	GCr	ÚK	doc. Ing. Milan Klapka, Ph.D.
4KD	Design and CAD - Advanced	cs	4	CPP: 13 × 2	GCr	ÚK	doc. Ing. Milan Klapka, Ph.D.
4KI	Kinematics	cs	4	P: 13 × 2 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Jiří Krejsa, Ph.D.
4M	Mathematics IV	cs	5	P: 13 × 2 C1: 13 × 2 CPP: 13 × 1	Cr,Ex	ÚM	doc. RNDr. Libor Žák, Ph.D.
4PP	Strength of Materials I	cs	7	P: 13 × 4 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
4PP-A	Strength of Materials I	en	7	P: 13 × 4 C1: 6 × 2 CPP: 7 × 2	Cr,Ex	ÚMTMB	doc. Ing. Tomáš Návrat, Ph.D.
5HY	Hydromechanics	cs	6	P: 13 × 3 C1: 9 × 2 CPP: 4 × 2	Cr,Ex	EÚ	doc. Ing. Jaroslav Štigler, Ph.D.
6AA	Automation	cs	5	P: 13 × 2 L: 2 × 2 CPP: 11 × 2	Cr,Ex	ÚAI	prof. RNDr. Ing. Miloš Šeda, Ph.D.
6AI	Automotive Engineering	cs	4	P: 13 × 2 L: 13 × 1	GCr	ÚADI	prof. Ing. Josef Štětina, Ph.D.
6AI-A	Automotive Engineering	en	4	P: 13 × 2 L: 13 × 1	GCr	ÚADI	prof. Ing. Josef Štětina, Ph.D.
6EE	Electrical Engineering and Electronics	cs	6	P: 13 × 3 L: 13 × 2	Cr,Ex	ÚVSSR	Ing. Radomír Pruša, Ph.D.
6EI	Power Engineering	cs	4	P: 13 × 2 C1: 13 × 1	GCr	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
6EI-A	Power Engineering	en	4	P: 13 × 2 C1: 13 × 1	GCr	EÚ	prof. Ing. Jiří Pospíšil, Ph.D.
6KL	Machine Design - Mechanical Drives (strojLAB)	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
6KM	Design and 3D Print	cs	4	P: 13 × 2 L: 6 × 2 CPP: 7 × 2	GCr	ÚK	doc. Ing. Daniel Koutný, Ph.D.
6KT	Machine Design - Mechanical Drives	cs	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
6KT-A	Machine Design - Mechanical Drives	en	5	P: 13 × 2 CPP: 13 × 2	Cr,Ex	ÚK	prof. Ing. Martin Hartl, Ph.D.
6MB	Mechanics in Medicine	cs	4	P: 13 × 2 L: 6 × 1 CPP: 7 × 1	GCr	ÚMTMB	Ing. Petr Marcián, Ph.D.
6OI	Optical Engineering	cs	4	P: 13 × 2 L: 3 × 1 CPP: 10 × 1	GCr	ÚFI	prof. RNDr. Radim Chmelík, Ph.D.
6SM	Engineering Metrology I	cs	4	P: 13 × 2 L: 13 × 2	Cr,Ex	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
6SM-A	Engineering Metrology I	en	4	P: 13 × 2 L: 13 × 2	GCr	ÚVSSR	doc. Ing. Róbert Jankových, CSc.
6SR	Construction of Production Machines and Robots	cs	4	P: 13 × 2 L: 13 × 2	GCr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
6SR-A	Construction of Production Machines and Robots	en	4	P: 13 × 2 L: 13 × 2	GCr	ÚVSSR	doc. Ing. Radek Knoflíček, Dr.
6TT	Thermomechanics	cs	6	P: 13 × 3 C1: 13 × 2	Cr,Ex	EÚ	prof. Ing. Josef Štětina, Ph.D.

Overview	winter semester	summer semester		total
total number of credits	0	1571		1571
average number of lessons per week	0	1294	,08	647	,04
average number of exams	0	225		225

Address:

Faculty of Mechanical Engineering
Brno University of Technology
Technická 2896/2
616 69 Brno
Czech Republic

Phone:

+420 541 14n nnn
+420 726 81n nnn – GSM Telef. O2
+420 604 07n nnn – GSM T-mobile
Operator: nnnn = 1111

Curriculum

Address:

Phone:

Contacts:

Interesting links: